Overview
The Pro Comp JTB401 is an adjustable rear track bar for locating the rear axle on the Jeep Wrangler TJ. It holds the rear axle position when the pinion angle changes after a tail shaft kit and CV drive shaft are installed. The position is rear, with part number JTB401 and part code EXPJTB401.
Fitment covers the 1997-2005 Jeep Wrangler (TJ) in the Rubicon, SE, Sahara, Sport and X trims, and the 2004-2006 Jeep Wrangler (LJ) in the Unlimited and Unlimited Rubicon trims.
Key features
- Adjustable rear track bar
- Chromoly construction, per the product name
- Rear axle location when the pinion angle changes
- Designed for use with a tail shaft kit and CV drive shaft
- Direct-fit design for the listed models
Track bar and axle centering
A track bar keeps the axle centered side to side under the body, stopping it from shifting when the suspension moves. Rear track bars take lateral loads off the springs and keep the axle from wandering in turns. Adjustable bars let the length be set so the axle sits centered at the lift in use.
When the pinion angle is changed with a tail shaft kit, the track bar geometry should be checked too, since the bar sets the axle position. Check the bar bushings for play and look at the frame mounts for cracks. Re-center the axle after any change to lift, spring height or tire size.
- Check track bar bushings for play
- Confirm axle centering after any lift change
- Inspect frame mounts for cracking
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | JTB401 |
| Listed part code | EXPJTB401 |
| UPC | 614901114522 |
| Position | Rear |
| Type | Adjustable track bar, chromoly |
| Fitment type | Direct fit |
Vehicle fitment
The bar fits the 1997-2005 Jeep Wrangler (TJ) in the Rubicon, SE, Sahara, Sport and X trims, and the 2004-2006 Jeep Wrangler (LJ) in the Unlimited and Unlimited Rubicon trims.
Other Wrangler generations are not in this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Set the track bar length so the axle sits centered under the body at the chosen lift height. Because the bar works with pinion angle changes, measure the pinion angle after the tail shaft kit and CV shaft are in place, then adjust the track bar to match.
What’s included
Confirm the mounting hardware and brackets against your installation before starting the install.












