Overview
The Pro Comp Pro Runner Monotube Shock Absorber, part number ZX2020, is a gas charged monotube shock with loop mounts at both ends. It is designed for late model trucks, Jeeps and SUVs. Confirm your vehicle’s year, model and trim before ordering.
In a monotube design, one pressure tube holds the oil and a floating piston keeps the gas charge separate from it. Pro Comp contrasts this with traditional twin tube, hydraulic shocks, which it says give less performance.
The nitrogen gas charge helps prevent cavitation during compression and rebound. That lets the shock shed heat more efficiently and reduces fade. The brushed, zinc plated and clear coated body is built to hold up in use.
The multi-stage valving is tuned for ride quality and handling. The shock is built for towing and fast desert whoops.
Key features
- Gas charged monotube design
- Nitrogen charge helps prevent cavitation.
- Multi-stage valving for ride quality and handling
- Brushed, zinc plated and clear coated body
- Boot included
Before you buy
Monotube shocks suit drivers who expect steady damping under repeated heavy use, because the gas charge is separated from the oil. Before buying, measure the old shock from eye to eye and compare the extended and collapsed lengths. Mount style matters too, since loop mounts need matching bushings or hardware at both ends. Keep the old hardware on hand until the new shock is confirmed to fit.
Look at how the shock will be used. Towing puts more heat into the damper, and fast desert running puts more stress into the mounts and body. Replace shocks in pairs on the same axle, and check that the boot covers the shaft through its full travel. Recheck the mounting bolts after the first few runs on rough ground.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | ZX2020 |
| UPC | 614901024227 |
| Series | Pro Runner |
| Extended length | 25.39 inches |
| Collapsed length | 16.50 inches |
| Travel length | 8.90 inches |
| Upper and lower mounts | Loop and loop |
| Adjustable | No |
| Remote reservoir | No |
| Finish | Zinc |
| Boot | Included |
| Sold as | Each |
Vehicle fitment
It is designed for late model trucks, Jeeps and SUVs. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One shock absorber with boot, sold as each under part number ZX2020.


























