Overview
The Pro Comp Suspension ES3000 324530 is a front hydraulic shock absorber for the 1996–1997 Lexus LX450 (Base) and the 1991–1999 Toyota Land Cruiser (Base). It uses the factory upper and lower mounts, so it is set up to replace the original shock at the same points, and its lengths are vehicle specific.
Pro Comp rates the 324530 for 0 in. of lift or drop. The body is twin tube cellular gas, the valving has 10 stages with velocity sensitivity, and the piston rod is 5/8 inch chrome-hardened, with a Teflon rebound stop. Double welded mounts add strength, and Pro Comp covers the shock with its limited lifetime warranty.
Key features
- Twin tube cellular gas design
- 10-stage velocity-sensitive valving
- 5/8 inch chrome-hardened piston rod
- Teflon rebound stop
- Double welded shock mounts
- Factory upper and lower mounts
- Rated for 0 in. lift or drop
- Pro Comp Suspension limited lifetime warranty
Front shock service life
Front shocks work hard during braking and steering, so they often wear faster than rear units on the same vehicle. Worn front dampers can cause the nose to dive, the steering to feel vague and tires to scallop. Checking the shock body for oil and the mounts for play is a simple way to judge whether the unit still controls the springs.
When a front shock is replaced, the steering geometry and ball joints should be checked too, since a worn joint can make a new shock seem ineffective. Replacing both fronts together keeps the left and right sides matched, and an alignment after the work is a sensible habit.
- Inspect ball joints and tie rod ends during the job
- Note the mount style before removing the old unit
- Handle the shock body carefully to avoid rod damage
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 324530 |
| UPC | 614901042153 |
| Shock series | ES3000 |
| Position | Front |
| Type | Hydraulic, twin tube cellular gas design |
| Extended, collapsed and travel lengths | Vehicle specific |
| Upper mount | Factory |
| Lower mount | Factory |
| Lift height rating | 0 in. lift or drop |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Each |
Vehicle fitment
The 324530 fits the 1996–1997 Lexus LX450 Base and the 1991–1999 Toyota Land Cruiser Base.
Lexus LX450 models from 1998 and later, and Toyota Land Cruisers from 1990 and earlier or from 2000 and later, are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The 0 in. lift or drop rating suits a Land Cruiser or LX450 at its factory height. Compare the vehicle-specific lengths with the front shock being replaced before fitting.
What’s included
One shock absorber, part 324530.
Not included: the dust boot.











