Overview
The Pro Comp ES9000 932004 is a gas charged twin tube shock absorber from Pro Comp Suspension. It is a 32.83 inch extended, 18.82 inch collapsed shock with 14.01 inches of travel, which makes the travel figure the key check for fit.
Its design pairs 10 stage velocity sensitive valving with a 1 3/8 inch nylon banded full displacement piston head. The design gives a smooth, comfortable high ride and enhances off road handling and performance, and the double welded shock mounts are built for strength and long lasting durability.
Key features
- Twin tube design
- 10 stage velocity sensitive valving
- 1 3/8 inch nylon banded full displacement piston head
- Double welded shock mounts
- Factory upper and lower mounts
Before you replace a shock
Travel is the measurement that most often separates a correct fit from a wrong one. Travel describes how far the shock can extend and compress between its mounts, and it has to suit the suspension travel of the vehicle. Measure the old shock with the vehicle on level ground and the suspension at its normal height, then write down the extended and collapsed lengths before shopping.
Once the length is right, look at the piston head and valving. Twin tube designs with velocity sensitive valving respond to both slow movements and quick hits, which suits mixed road and trail use. Check the old shock’s body for dents, leaking seals and torn boots before reinstalling anything, since damage near the rod seal shortens service life. Replace bushings or worn mounts alongside the shock to keep the new unit working as intended.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 932004 |
| UPC | 614901072778 |
| Shock series | ES9000 |
| Extended length | 32.83 in |
| Collapsed length | 18.82 in |
| Travel length | 14.01 in |
| Upper mount | Factory |
| Lower mount | Factory |
| Piston head | 1 3/8 in nylon banded, full displacement |
| Valving | 10 stage velocity sensitive, twin tube |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot | Not included |
Vehicle fitment
No vehicle is named for this shock. Measure the extended length, collapsed length and 14.01 in travel of the shock you are replacing and compare them with these figures before ordering.
Because the travel and length figures are specific to this part, a close match in name is not enough. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One shock absorber, finished in white.
Not included: dust boot.










