Overview
The Pro Comp Pro Runner part ZX2004 is a gas-charged monotube shock absorber with loop-style upper and lower mounts. It measures 32.40 inches extended, 19.55 inches collapsed and 12.85 inches of travel, and the specification entry marks it as not adjustable.
The Pro Runner line is designed for late-model trucks, Jeeps and SUVs. The shock body is brushed, zinc plated and clear coated, and it is nitrogen gas charged. The nitrogen charge is designed to limit cavitation during compression and rebound and to help the shock shed heat, which reduces shock fade.
A monotube shock keeps the damping piston and its gas charge in one tube, rather than the two tubes of a twin-tube design. The gas section is pressurized with nitrogen, which is designed to limit cavitation during compression and rebound. The lengths, mounts and fit details for part ZX2004 are set out below.
Key features
- Monotube body with a nitrogen gas charge
- Multi-stage valving tuned for the application
- Loop-style upper and lower mounts
- Zinc plated, clear-coated finish
- Boot included
Monotube shock basics
A monotube body is sealed under pressure, and the gas section keeps the oil from foaming as the piston moves. That steadier pressure helps the damper respond the same way on a long grade as it does on a short bump. Because the piston and gas share one tube, the body is also less prone to losing damping when it gets hot, which is why these units are common on trucks that see steady highway use and trail work.
Choosing a replacement means matching the length and mount style first, then considering how the truck is used. A shock that is too short can bottom out early, while one that is too long can limit steering and suspension travel. Mounts and bushings wear over time, so they are worth inspecting at the same time as the shock.
- Measure the old shock extended and collapsed before ordering
- Look for leaking oil on the body as a sign of wear
- Replace shocks in pairs for even damping
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | ZX2004 |
| UPC | 614901024036 |
| Shock series | Pro Runner |
| Extended length | 32.40 in. |
| Collapsed length | 19.55 in. |
| Travel | 12.85 in. |
| Upper and lower mounts | Loop |
| Adjustable | No |
| Remote reservoir | No |
| Gas charged | Yes, nitrogen |
| Finish | Zinc plated, clear coated |
| Boot included | Yes |
Vehicle fitment
Confirm fit for the year, model and trim of your vehicle before ordering, and check the loop mounts against the shock being replaced.
Installation notes
Compare the 32.40 in. extended and 19.55 in. collapsed lengths with the shock being replaced, and confirm that the loop mounts suit your vehicle.
What’s included
One zinc-finished monotube shock, with a boot.




























