Overview
The Pro Comp 314010 is an ES3000 twin tube cellular gas shock with a stem upper mount and a loop lower mount. It measures 13.96 inches extended, 9.25 inches collapsed and has 4.71 inches of travel.
The shock uses 10-stage velocity sensitive valving and is finished in white. It is not adjustable and sold as each.
Key features
- Twin tube cellular gas design
- 10-stage velocity sensitive valving
- Teflon rebound stop
- Double welded shock mounts
- Limited lifetime warranty
Twin tube gas shock basics
A twin tube gas shock uses an inner working cylinder and an outer reserve tube, with gas pressure helping to keep the fluid steady. This layout tends to suit daily driving and light off-road use, where consistent damping matters more than extreme stroke. The gas charge reduces foaming during repeated movement, which helps the shock respond predictably.
Care is simple but important. Keep the rod clean and inspect the seal after washing the truck, since grit can wear the seal quickly. Check the mounts for play and the body for oil film. Replacing shocks in pairs on the same axle keeps the ride balanced and helps the truck handle evenly.
- Keep the rod clean and free of grit
- Inspect the seal for oil film after washing
- Replace shocks in pairs on the same axle
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 314010 |
| Series | ES3000 |
| Extended length | 13.96 inches |
| Collapsed length | 9.25 inches |
| Travel | 4.71 inches |
| Upper mount | Stem |
| Lower mount | Loop |
| Adjustable | No |
The 314010 is a twin tube cellular gas shock with a stem upper mount and a loop lower mount. At 13.96 inches extended and 9.25 inches collapsed, it has 4.71 inches of travel, which is a short stroke that suits smaller trucks and SUVs. The shock uses 10-stage velocity sensitive valving and a Teflon rebound stop, and its piston rod is a 5/8 inch chrome hardened unit.
Because no vehicle is named, compare the stem and loop mounts and the two lengths with the original shock before ordering. The limited lifetime warranty from Pro Comp applies to the ES3000 line.
Vehicle fitment
The part is not tied to a named truck. Confirm the stem upper and loop lower mounts and the 13.96 inch extended length against your original shock before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One ES3000 shock.









