Overview
The Pro Comp ES9000 part 934054 is a gas-charged shock absorber with factory upper and lower mounts. It measures 33.59 inches extended and 19.01 inches collapsed, and it has 14.58 inches of travel.
The shock has a twin-tube body with 10-stage velocity-sensitive valving and a 1 3/8 inch nylon-banded piston head. Pro Comp describes its ride as comfortable on the highway and improved for off-road handling, and the mounts are double-welded.
The shock is built for heavy loads and demanding driving, and its 1 3/8 inch piston head and white finish are part of that design. Measure the shock being replaced and compare its extended and collapsed lengths before ordering.
Key features
- 10-stage velocity-sensitive valving
- Gas charged with a white finish
- 1 3/8 inch nylon-banded, full-displacement piston head
- Double-welded shock mounts
Choosing a replacement shock
A replacement shock controls how quickly the springs compress and rebound, so it affects steering response, braking stability and tire contact on uneven ground. Gas-charged designs help keep damping steady when the body heats up during repeated bumps, which matters on longer trail runs and loaded highway trips. Before choosing one, measure the old shock fully extended and fully collapsed, because those lengths and the travel decide whether the new unit will clear the mounts without binding.
Shocks rarely wear alone. Bushings, mounts and worn springs change how a new unit loads, so inspect them at the same time. Signs the old shock has reached the end of its life include oil on the body, dented tubes, cracked bushings, bouncing after bumps and uneven tire wear. Retighten mounting hardware after the first few drives and again after rough trails.
- Check the mounts and bushings for wear before fitting
- Inspect the springs for sag
- Replace shocks in pairs on the same axle
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 934054 |
| UPC | 614901934540 |
| Shock series | ES9000 |
| Extended length | 33.59 in. |
| Collapsed length | 19.01 in. |
| Travel | 14.58 in. |
| Gas charged | Yes |
| Piston head | 1 3/8 in., nylon-banded, full displacement |
| Upper and lower mounts | Factory |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering, and compare the 33.59 in. extended and 19.01 in. collapsed lengths with the shock being replaced.
What’s included
The unit is a single gas-charged shock and does not include a boot.






