Overview
The Pro Comp ES9000 Series Shock Absorber (part number 925543) is a twin tube shock with loop mounts at both ends. Pro Comp says its 10-stage velocity sensitive valving gives a smooth, comfortable high ride and helps off-road handling.
The piston head is a 1 3/8-inch nylon banded full displacement design, and the shock mounts are double welded. Measure the old shock before ordering to confirm length.
Key features
- Twin tube design
- 10-stage velocity sensitive valving
- 1 3/8-inch nylon banded full displacement piston head
- Double welded shock mounts
- Zinc finish
Measuring before you order
Measuring the old shock is the most reliable way to confirm a replacement fits. Take the extended length from the center of the upper mount to the center of the lower mount with the shock fully extended, then measure the collapsed length with it compressed. Write both numbers down and compare them with the new shock’s lengths before buying.
Twin tube shocks are sensitive to mounting angle, and a shock that is too long or too short can bind at full travel or run out of stroke. Loop mounts at both ends need bushings that fit the bolts cleanly. Check that the bushings are seated and that the mounting bolts are tightened to the specified torque after installation, and recheck them after the first few drives.
- Note the mount type at each end
- Measure bolt hole spacing on the truck
- Check spacing on any spacer or bracket
- Look for worn bushings before fitting new shocks
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 925543 |
| UPC | 614901072259 |
| Series | ES9000 |
| Design | Twin tube |
| Extended length | 25.74 inches, with a second measurement of 25.23 inches |
| Collapsed length | 15.49 inches, with a second measurement of 15.22 inches |
| Travel length | 10.25 inches |
| Mounts | Loop and loop |
| Adjustable | No |
| Remote reservoir | No |
| Finish | Zinc |
| Boot | Not included |
| Sold as | Each |
Vehicle fitment
Confirm shock length and mount type for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Measure the old shock’s extended and collapsed lengths before ordering, and compare them with both sets of numbers.
What’s included
One shock absorber, sold as each under part number 925543.
Not included: The boot.






















