Overview
The Pro Comp ZX2076 is a front Pro Runner SS monotube shock absorber for the 2004–2008 Ford F-150 and the 2004 F-150 Heritage. It is designed to clear 33 inch tires with 0 to 6 inches of lift, and it retains the factory coil spring, which is not included.
Like other Pro Runner SS shocks, the ZX2076 is nitrogen charged with a 2 inch diameter body. The monotube design resists cavitation during compression and rebound and sheds heat more efficiently than a twin tube hydraulic shock. The body is zinc plated and clear coated, and the valving is multi-stage.
A monotube keeps the oil and nitrogen in one tube, separated by a floating piston. The nitrogen holds the oil under pressure, which Pro Comp says reduces cavitation in the ZX2076 during compression and rebound, so the shock keeps working consistently on rough terrain.
Key features
- Front position, direct fit
- Clears 33 inch tires
- Retains the factory coil spring
- Nitrogen charged monotube on a 2 inch body
- Zinc plated, clear coated finish
Working with the factory coil
A shock does not hold up the truck; the coil spring does. When a shock keeps the factory coil, the spring still carries the vehicle’s weight, so the old spring’s condition sets how the front end sits. A tired coil can make new shocks feel too soft or let the truck sit lower on one corner than the other.
Before fitting, measure the height at each front wheel arch and compare the sides. Check the rubber bump stops, since worn stops can let the shock bottom out hard. After installation, drive over a few familiar bumps and listen for knocks at the mounts. Recheck the fasteners once the suspension has settled.
- Compare front ride height side to side
- Inspect rubber bump stops
- Recheck fasteners after the first drives
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | ZX2076 |
| UPC | 614901082258 |
| Shock series | Pro Runner SS |
| Position | Front |
| Lift height | 0 to 6 in. |
| Tire clearance | 33 in tires |
| Body diameter | 2 in |
| Charge | Nitrogen, gas charged |
| Finish | Zinc plated, clear coated |
| Coil spring | Factory coil retained, not included |
Vehicle fitment
It is a direct fit for the 2004–2008 Ford F-150 and the 2004 Ford F-150 Heritage.
The 2009–2013 F-150 uses the Pro Comp ZX2069 instead. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The shock keeps the factory coil in service, so the existing spring is reused. Check the lift and tire size against the 0 to 6 inch and 33 inch figures before driving the truck.
What’s included
One front Pro Runner SS monotube shock. The coil spring is not included.









































