Overview
The Pro Comp 326006 is an ES3000 Series shock absorber with a twin tube cellular gas design. It is built to improve driving comfort and performance on and off road, and it is sold as a single unit with a limited lifetime warranty.
The 10 stage velocity sensitive valving lets the shock adapt to the road, which Pro Comp says also improves handling. The shock has a 5/8 inch chrome hardened piston rod and a Teflon rebound stop, and Pro Comp says these give a comfortable highway ride and the ability to handle demanding conditions.
Double welded shock mounts are fitted for maximum strength. The 326006 is a universal fit shock, so the vehicle’s length and mount style must be checked before installation.
Key features
- Twin tube cellular gas body
- 10 stage velocity sensitive valving
- 5/8 inch chrome hardened piston rod
- Teflon rebound stop
- Double welded shock mounts
Replacing and measuring
Replacing a shock is easiest when the old unit is measured before the new one is ordered. Measure eye to eye at both ends with the suspension at rest, and note the mount style on each side. A shock that is even slightly too long or too short can bind or sit at the wrong height.
Twin tube cellular gas shocks use a reserve chamber to keep damping steady as the fluid works. Heat and repeated hard use wear seals over time, so a shock that has lost control should be swapped rather than patched. Replace in pairs on the same axle for even handling.
Check the old shock for oil, cracked bushings and bent mounts before fitting. A failing shock often shows up as a bouncy ride, fading control after bumps or uneven tire wear.
- Measure the old shock before ordering
- Compare mount style at both ends
- Inspect bushings and bracket welds
- Replace shocks in pairs when possible
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 326006 |
| UPC | 614901042351 |
| Shock series | ES3000 Series |
| Body | Twin tube, cellular gas |
| Valving | 10 stage, velocity sensitive |
| Piston rod | 5/8 in, chrome hardened |
| Rebound stop | Teflon |
| Mounts | Double welded |
| Warranty | Pro Comp limited lifetime |
| Fitment type | Universal fit |
Vehicle fitment
It is a universal fit shock. Measure the shock it replaces and compare its extended length and mount style before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One ES3000 Series shock absorber, sold as a single unit.










