Overview
The Pro Comp Suspension ES3000 321502 is a front hydraulic shock absorber for a wide range of 1969–1991 Chevrolet and GMC trucks. It fits Chevrolet and GMC K10, K15, K20, K25, K30, K35 and K1500 through K3500 pickups and Suburbans, the Chevrolet and GMC Blazer and Jimmy models, and the Chevrolet V-series and GMC V-series Suburbans. It is rated for a 2.5 to 4 in. lift.
The shock uses factory upper and lower mounts, and its lengths are set to each vehicle rather than one fixed size. The ES3000 is a twin tube cellular gas design with 10-stage velocity-sensitive valving. The 5/8 inch chrome-hardened piston rod and Teflon rebound stop are part of that build, and the shock carries the Pro Comp Suspension limited lifetime warranty.
Key features
- Twin tube cellular gas design
- 10-stage velocity-sensitive valving
- 5/8 inch chrome-hardened piston rod
- Teflon rebound stop
- Double welded shock mounts
- Factory upper and lower mounts
- Rated for a 2.5 to 4 in. lift
- Pro Comp Suspension limited lifetime warranty
Measuring before ordering
This shock covers a wide range of Chevrolet and GMC trucks, Blazers and Jimmys, so body style and axle type matter as much as the year. Before buying, measure the suspension height and compare the old shock’s extended and collapsed lengths. Trucks that have been lifted or re-sprung may need a length that differs from the original.
Older K-series trucks often have worn spring perches, bushings and mount hardware. Inspect the upper and lower brackets for cracks and rust. Replacing a worn mount while the shock is out is an easy step that improves how the new unit works.
Front shock service often goes with steering and suspension checks. Look at tie rod ends, ball joints and the steering stabilizer, because play in those parts changes how the shock is loaded. A new shock will not fix a steering or front-end problem on its own.
- Measure suspension height before buying
- Compare old and new lengths
- Inspect upper and lower brackets
- Check tie rod ends and ball joints
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 321502 |
| UPC | 614901041279 |
| Shock series | ES3000 |
| Position | Front |
| Type | Hydraulic, twin tube cellular gas design |
| Extended, collapsed and travel lengths | Vehicle specific |
| Upper mount | Factory |
| Lower mount | Factory |
| Lift height rating | 2.5 to 4 in. lift |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Each |
Vehicle fitment
It fits the 1969–1974 and 1987–1991 Chevrolet Blazer (Base, Custom Deluxe, Scottsdale and Silverado); the 1969–1986 Chevrolet K10 pickups and K10 and K20 Suburbans; the 1969–1974 and 1977–1986 Chevrolet K30; the 1975–1986 Chevrolet K5 Blazer; the 1987 Chevrolet V10 and V30; the 1986 GMC C2500 Suburban; the 1970 GMC C35 and C3500; the 1970–1991 GMC Jimmy; the 1975–1978 GMC K15 and K25 pickups and Suburbans; the 1969–1974 GMC K15, K25 and K35 pickups and Suburbans; the 1979–1986 GMC K1500, K2500 and K3500 pickups and Suburbans; the 1977–1978 GMC K35; and the 1987 GMC V1500, V2500 and V3500.
Chevrolet and GMC trucks from 1992 and later, and the 1968 and earlier K-series models, are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The shock is rated for a 2.5 to 4 in. lift. Measure your truck’s suspension height before ordering, and compare the vehicle-specific lengths with the shock you are replacing, since the list covers many different body and axle combinations.
What’s included
One shock absorber, part 321502.
Not included: the dust boot.












