Overview
The Pro Comp Suspension ES3000 326515 is a hydraulic shock absorber from the ES3000 Series that uses factory upper and lower mounts. Its extended, collapsed and travel lengths are vehicle specific. The shock is finished in white and is not adjustable. It is sold as each, with a 10-stage velocity-sensitive valving design.
The ES3000 is a twin tube cellular gas design with 10-stage velocity-sensitive valving. The 5/8 inch chrome-hardened piston rod and Teflon rebound stop are built into the shock, and the double welded mounts are made for strength. It carries the Pro Comp Suspension limited lifetime warranty.
Key features
- Twin tube cellular gas design
- 10-stage velocity-sensitive valving
- 5/8 inch chrome-hardened piston rod
- Teflon rebound stop
- Double welded shock mounts
- Factory upper and lower mounts
- White finish
- Pro Comp Suspension limited lifetime warranty
Why factory mounts matter
Factory mounts keep the shock in the same position the original used, so the suspension geometry stays close to stock. Before buying, look at the original upper and lower attachment points and the bushings that sit in them. A shock that lines up without force is a better sign than one that needs spacers.
Non-adjustable shocks set damping inside the unit, so the ride is the same at every setting. That suits an owner who wants a simple, consistent response. If the ride feels too firm or too soft after installation, the shock itself is usually the cause rather than a setting to change.
- Compare the original shock’s collapsed and extended lengths
- Check bushing condition at each mount
- Do not force a shock into a mount that does not line up
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 326515 |
| UPC | 614901042573 |
| Shock series | ES3000 |
| Type | Hydraulic, twin tube cellular gas design |
| Extended, collapsed and travel lengths | Vehicle specific |
| Upper mount | Factory |
| Lower mount | Factory |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Each |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering. Compare the factory mounts and vehicle-specific lengths with your current shock before fitting.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One shock absorber, part 326515.
Not included: the dust boot.










