Select your vehicle

Pro Comp ES3000 Series Shock Absorber – 332009

Pro Comp Suspension

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Pro Comp ES3000 shock absorber, part number 332009, factory upper and lower mounts
  • Vehicle-specific lengths; no vehicle fitment listed
  • Twin-tube gas design, 10-stage velocity-sensitive valving
  • Non-adjustable, white finish, sold as each

Description

Overview

The ES3000 shock absorber, part number 332009, is built for factory mounts with vehicle-specific length. Check it against the shock on your truck before ordering.

It is a gas-charged twin-tube shock with 10-stage velocity-sensitive valving. The 5/8 inch chrome-hardened piston rod and the Teflon rebound stop complete the internal design. A non-adjustable shock like this one relies on its valving rather than a user setting.

Key features

  • 10-stage velocity-sensitive valving.
  • A 5/8 inch chrome-hardened piston rod.
  • A Teflon rebound stop.
  • Double-welded mounts.
  • Limited lifetime warranty from Pro Comp.

Care after installation

Once the shock is in, the main job is keeping the mounts and rod in good shape. Check the mount bolts after the first few drives, since new hardware can settle. Grit and water reach the rod more easily when no boot is fitted, so keep the rod clean and wipe it after mud or river crossings.

Look for seepage down the body, a bouncy ride after one dip, and cracks around the upper or lower mount welds. A shock that has lost damping often feels soft in the body rather than making a loud noise. Replacing a worn shock with a matched unit on the same axle keeps the ride even across the vehicle.

  • Re-check mount bolts after first drives
  • Wipe the rod after wet trails
  • Inspect welds at both mounts

Specifications

Brand Pro Comp Suspension
Part number 332009
UPC 614901042979
Shock series ES3000
Extended length Vehicle specific
Collapsed length Vehicle specific
Travel length Vehicle specific
Upper mount Factory
Lower mount Factory
Adjustable No
Remote reservoir No
Body type Hydraulic / gas charged
Finish White
Dust boot included No
Sold as Each

Vehicle fitment

Fit is not confirmed for part 332009. Measure the shock being replaced and check your truck’s year, model and trim before buying.

Vehicle-specific lengths mean the right shock depends on the truck. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Confirm the factory mount spacing on your truck and the shock’s full extension before installing, so the shock does not hit the frame at the top of its stroke.

What’s included

One ES3000 shock absorber.

Not included: a dust boot. The shock is sold without one.

SKU: EXP332009 Category:

Specification

Shipping weight 8.00 lbs
Package dimensions 25.00 × 3.00 × 3.00 in
brands

Questions & Answers

Is the 332009 sold with mounting hardware?

No hardware list is given, and the shock uses factory mounts, so the original hardware is normally reused. Inspect your existing mounts before installing the new shock.

Is the 332009 a rear shock?

Confirm its position against the original shock before ordering. The 332009 uses factory upper and lower mounts, so the mounting points on your truck decide the match.

Can the 332009 be tuned?

No. It is non-adjustable, so the damping is set by the internal valving and there is no external control for changing it.

What keeps the rod clean without a boot?

Wipe the exposed rod after mud, sand or water crossings so grit does not work into the seal. Check the rod for pitting or nicks, since a damaged surface can tear seals quickly. Keep the area around the seal free of heavy buildup.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon