Overview
It is a rear ES9000 Series gas charged shock absorber for Land Rover Defender 90 and 110, Discovery and Discovery Series II, Range Rover and Range Rover Sport models, sold individually. It fits models from 1970 to 2000, including several special and anniversary editions of the Range Rover.
The shock measures 27.07 inches extended and 15.94 inches collapsed, which gives 11.13 inches of travel. Pro Comp rates it for a 5 inch lift. Both mounts are factory style, and the twin tube body has a nylon banded piston head, double welded mounts and 10 stage velocity sensitive valving.
Key features
- Rear position for Land Rover models
- Gas charged twin tube design
- 10 stage velocity sensitive valving
- 1 3/8 inch nylon banded full displacement piston head
- Double welded shock mounts
Older Land Rover rear suspension
Rear shocks on older Land Rover models help control the axle over rough trails and paved roads, and they work alongside the springs and bushings to keep the rear end stable. Many of these trucks have aged rubber and metal parts, so inspect the shock mounts and rubber bushings before fitting a new unit. Corrosion around factory mounts is common in older vehicles and can make removal harder.
Shocks that have lost damping often leave a rear end that bounces, wanders or sits lower on one side. Check for oil on the body, a bent shaft, or uneven rear wear. Replacing both rear shocks at the same time keeps the ride consistent. Ask a shop familiar with these trucks about any related parts that are due, such as bushings or bump stops.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 926573 |
| UPC | 614901926576 |
| Shock series | ES9000 |
| Position | Rear |
| Extended length | 27.07 in |
| Collapsed length | 15.94 in |
| Travel length | 11.13 in |
| Upper mount | Factory |
| Lower mount | Factory |
| Gas charged or hydraulic | Gas charged |
| Lift rating | 5 in |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Each |
Vehicle fitment
It is a rear fit for the 1993 Land Rover Defender 110, the 1994 to 1995 and 1997 Defender 90, the 1994 to 1999 Discovery, the 1999 to 2000 Discovery Series II, the 1970 to 1974 and 1987 to 2000 Range Rover in the trims covered, and the 1993 Range Rover Sport.
Land Rover models from other years, and Range Rover Sport models after 1993, are not on this entry. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Factory mounts at both ends are meant to keep the shock in the original rear location. The 5 inch lift rating is the figure to check against your rear height before ordering.
What’s included
One rear shock, sold as each, with no boot.












