Overview
The ES3000 shock absorber, part number 332053, is designed for factory mounts. Its extended, collapsed and travel lengths are vehicle specific, so the original shock is the reference for fit.
It is a gas-charged twin-tube shock with 10-stage velocity-sensitive valving and a chrome-hardened 5/8 inch piston rod.
The shock has a 5/8 inch chrome-hardened piston rod and a Teflon rebound stop. Its lengths depend on the vehicle, so match it to the original unit rather than to the part number alone.
Key features
- 10-stage velocity-sensitive valving.
- A 5/8 inch chrome-hardened piston rod.
- A Teflon rebound stop.
- Double-welded mounts for strength.
- This shock carries a limited lifetime warranty from Pro Comp.
Comparing similar shocks
Two shocks that look alike can still differ in length, mount position and damping. Lay the old shock beside the new one and compare the mount centers and overall lengths before ordering. Body style also matters, since a gas-charged twin-tube design holds damping more steadily than an unpressurized design when it runs hot.
Valving and piston rod size are the other differences. A 5/8 inch rod is stiffer than a thinner rod, and a different valving pattern changes how the ride feels over small bumps. For a truck driven mostly on pavement, a similar gas-charged design with the same mounts is usually the simplest match. Keep the old shock until the new one is confirmed to fit.
- Mount centers measured side by side
- Overall length against the original
- Rod diameter and rebound stop type
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 332053 |
| UPC | 614901695977 |
| Shock series | ES3000 |
| Extended length | Vehicle specific |
| Collapsed length | Vehicle specific |
| Travel length | Vehicle specific |
| Upper mount | Factory |
| Lower mount | Factory |
| Adjustable | No |
| Body type | Hydraulic / gas charged |
| Finish | White |
| Dust boot included | No |
| Sold as | Each |
Vehicle fitment
Fit depends on the vehicle, so check your year, model and trim and compare the original shock’s length before buying.
Because the length is vehicle specific, a shock that bolts in may still sit at the wrong height. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Measure the shock you are removing between its mounting centers and compare that number with the vehicle-specific information before ordering.
What’s included
One ES3000 shock absorber.
Not included: the dust boot, which is not included.










