Overview
The Pro Comp 926512 is an ES9000 Series gas charged shock absorber with a twin tube body, sold individually. It measures 26.79 inches extended and 15.56 inches collapsed, which gives 11.23 inches of travel. Both the upper and lower mounts are factory style.
Confirm fit for your vehicle’s year, model and trim before ordering. Measure the shock on your truck and compare the extended and collapsed lengths before buying.
Key features
- Gas charged twin tube design
- 10 stage velocity sensitive valving
- 1 3/8 inch nylon banded full displacement piston head
- Double welded shock mounts
- Factory-style upper and lower mounts
Reading the old shock
Before swapping any shock, pull the old unit and record its extended length, collapsed length and mount type. Shocks wear slightly over time, so a measured match is a more reliable guide than the year and model alone. A shock that is too long can bottom the axle, while one that is too short can bind the mount at full extension.
Factory-style mounts usually bolt in without modification, which helps when the shock is a direct stock replacement. Look at the stud diameter, bushing size and bracket condition at each end. Replacing rubber isolators at the same time keeps the shock from rattling and helps it sit square on the mount.
Signs that a shock needs replacing include fluid on the body, a loud knock over small bumps, and cupped tire wear. Some trucks lose ride height after one shock fails, so checking both sides avoids uneven handling. Clean the mounting surfaces before installing, and retighten the hardware after the first short drive.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 926512 |
| UPC | 614901119541 |
| Shock series | ES9000 |
| Extended length | 26.79 in |
| Collapsed length | 15.56 in |
| Travel length | 11.23 in |
| Upper mount | Factory |
| Lower mount | Factory |
| Gas charged or hydraulic | Gas charged |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Each |
Vehicle fitment
Check fit for your vehicle before ordering. Compare the 26.79 inch extended and 15.56 inch collapsed lengths with your shock.
The lengths match part 926511 but the mounts differ, so check both length and mount type. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One shock absorber, sold as each, without a boot.









