Overview
The Pro Comp 925530 is a front ES9000 Series gas charged shock absorber with loop-style mounts at both ends, sold individually. It fits the 1977 to 1979 Ford F-150 and the 1961 to 1978 Ford F-250, with coverage for the Base, Custom, Northland, Ranger, Ranger Lariat, Ranger XLT and XLT versions.
The shock is 25.17 inches extended and 14.79 inches collapsed, which gives 10.38 inches of travel. Pro Comp rates it for a 2 to 4 inch lift, a taller range than most front shocks in this group. The twin tube body uses a nylon banded piston head, double welded mounts and 10 stage velocity sensitive valving.
Key features
- Front position with loop mounts at both ends
- Gas charged twin tube design
- 10 stage velocity sensitive valving
- 1 3/8 inch nylon banded full displacement piston head
- Double welded shock mounts
Front shock basics
A front shock controls how the axle moves over bumps and how the truck settles under braking. On a solid axle truck like these Fords, the shock works with the leaf springs and steering linkage, so its job is to damp spring rebound and keep the tires in contact with the ground. Gas charged bodies help resist fade when the shock heats up on long descents, which matters more off road than on pavement.
When replacing a front shock, look at the mounts first. Loop ends need matching brackets or bushings, and worn eyes can make the shock rattle or bind. Check the bushings at both ends for cracking and play, and replace them if they feel soft. Front shocks often wear out together, so inspect both sides at the same time and replace them in pairs to keep the ride even.
Between inspections, watch for oil on the shock body, clunking over small bumps, and uneven tire wear across the front tread. Those signs suggest the valving is no longer controlling the movement. Keep the mounting hardware tight after the first few drives, and check it again after rough trail use.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 925530 |
| UPC | 614901072235 |
| Shock series | ES9000 |
| Position | Front |
| Extended length | 25.17 in |
| Collapsed length | 14.79 in |
| Travel length | 10.38 in |
| Upper mount | Loop |
| Lower mount | Loop |
| Gas charged or hydraulic | Gas charged |
| Lift range | 2 to 4 in |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Each |
Vehicle fitment
It fits the 1977 to 1979 Ford F-150 and the 1961 to 1978 Ford F-250, with trim names matching each generation.
Ford F-150 models from 1980 on, and F-250 models from 1979 on, are not on this entry. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Loop mounts at both ends need matching loop brackets or bushings. The 2 to 4 inch lift range is the figure to check against your front suspension height.
What’s included
One front shock, sold as each, with no boot.











