Overview
The Pro Comp 924543 is a rear ES9000 Series gas charged shock absorber with a twin tube body, sold individually. It measures 25.70 inches extended and 14.52 inches collapsed, which gives 11.18 inches of travel. Pro Comp rates it for a 0 to 1 inch lift, and both mounts are factory style.
Measure the rear shock you are replacing and compare its lengths before ordering, since the 0 to 1 inch lift rating is narrow.
The 11.18 inch travel figure is the difference between the extended and collapsed lengths, so measure your rear shock before ordering.
Key features
- Rear position with factory-style mounts
- Gas charged twin tube design
- 10 stage velocity sensitive valving
- 1 3/8 inch nylon banded full displacement piston head
- Double welded shock mounts
Near-stock rear suspension
A rear shock with a narrow lift range suits a truck that stays close to its original height. Rear shocks control axle movement, so keeping travel close to stock helps the rear end stay stable under load. Before replacing it, measure the old shock and confirm the lift height of the truck matches the rating.
Rear shocks wear over time and may need replacing sooner on trucks that carry loads or tow. Look for leaking fluid, a bouncy ride after bumps, and uneven tire wear across the rear axle. Replacing both rear shocks together keeps the ride even, and inspecting the bushings and mounts at the same time avoids repeat work.
- Measure the rear shock before ordering
- Check mounts and bushings during replacement
- Look for leaks and uneven rear tire wear
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 924543 |
| UPC | 614901924534 |
| Shock series | ES9000 |
| Position | Rear |
| Extended length | 25.70 in |
| Collapsed length | 14.52 in |
| Travel length | 11.18 in |
| Upper mount | Factory |
| Lower mount | Factory |
| Gas charged or hydraulic | Gas charged |
| Lift range | 0 to 1 in |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Each |
Vehicle fitment
Before ordering, verify the year, model and trim of your truck, and compare the 25.70 inch extended and 14.52 inch collapsed lengths with your rear shock.
The 0 to 1 inch lift rating makes this shock best for near-stock rear suspension. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Factory mounts at both ends are meant to keep the shock in the original rear location. Check the lift height against the rating before you buy.
What’s included
One rear shock, sold individually. Shock boots are sold separately.












