Overview
The Bilstein 5100 Series shock absorber, part number 24-185943, is a monotube, gas-charged damper with a bar pin lower mount and a stem upper mount. The 5100 Series suits lifted trucks, Jeeps and prerunners, and this model has a 46mm inside-diameter smooth body in a non-coilover layout. Confirm fit for your vehicle’s year, model and trim before ordering, and check the mount style and overall length first.
The 5100 Series is a traditional single-tube design under high gas pressure, built for steady, fade-free damping over a long service life. With a collapsed length of 16.97 in, an extended length of 28.44 in and 11.47 in of travel, it covers a wide working range. Its damping suits large-diameter tires on lifted builds.
Key features
- Monotube gas pressure construction in a single tube body.
- Self-adjusting deflecting disc valving.
- High-flow piston, which Bilstein says reduces harshness.
- Independent rebound and compression tuning.
- Larger working piston area for damping control.
- Designed for specific manufacturer lift kits that keep the original O.E.M. mounting configuration.
- Boot included.
Lift kits and brackets
A shock with a bar pin lower mount and a stem upper mount depends on the brackets around it. Before fitting, check that the bar pin diameter and bracket hole match, and that the stem sits square in its upper mount. Lift kits often change the angle of the suspension, so the new shock may load differently than the one it replaces.
The unit is gas charged, so keep it upright during handling and avoid heating it. Replace both shocks on the same axle when possible so damping stays even. Bump stops, bushings and brackets are worth inspecting while the old shock is removed, since worn parts can affect how the new shock performs.
- Check bar pin size and bracket fit
- Inspect upper stem for damage
- Replace worn bushings
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-185943 |
| UPC | 651860649986 |
| Shock series | 5100 Series |
| Collapsed length | 16.97 in |
| Extended length | 28.44 in |
| Travel length | 11.47 in |
| Lower mount | Bar pin |
| Upper mount | Stem |
| Shaft diameter | 14mm |
| Body design | 46mm ID smooth body (non-coilover) |
| Internal design | Mono tube |
| Reservoir | No |
| Finish | Zinc plated |
| Boot included | Yes |
| Hydraulic / gas charged | Gas charged |
Vehicle fitment
Fitment for this part number is not confirmed. Confirm your vehicle’s year, make, model and chassis before ordering, and compare the mounts and lengths with the shock you are replacing.
Compare the bar pin lower mount, stem upper mount and both lengths against the shock you are replacing. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The bar pin lower mount and stem upper mount must match the brackets on your axle and frame. Gas-charged shocks are under pressure, so have the unit serviced or disposed of by a qualified shop.
What’s included
Check the package contents against your installation before starting. Lift kit brackets and mounting hardware may be needed.
Not included: lift kit brackets or mounting hardware, which the listed details do not cover.














