Overview
The Pro Comp ES9000 Series shock absorber, part number 924510, is a rear nitrogen gas charged twin tube shock with a 24.70 inch extended length and a 14.52 inch collapsed length. It fits a 2-4 in. lift.
The ES9000 twin tube design and 10-stage velocity sensitive valving give a smooth, comfortable highway ride while improving off-road handling. The 1-3/8 inch nylon banded full displacement piston head and double welded shock mounts add strength. Shock boots are sold separately, and the shock is sold individually.
Key features
- ES9000 Series twin tube gas charged shock
- 10-stage velocity sensitive valving
- 24.70 inch extended length, 14.52 inch collapsed length, 10.18 inch travel
- Stem upper mount and loop lower mount
- 1-3/8″ nylon banded full displacement piston head
- Double welded shock mounts
- White finish; not adjustable; no remote reservoir
- Rear position, for a 2-4 in. lift
Rear shock replacement tips
Rear shocks handle load changes when the truck carries cargo or tows, so they often wear faster than fronts on a working vehicle. Replacing both rear shocks keeps damping even on each side, which helps the rear end track straight under braking. A shock with the wrong length can bottom out or run out of travel, so measure the old unit before fitting a new one.
Before installing rear shocks, look at the spring type, the bump stops and the brake hose routing. A raised rear end changes the angle of the shock, which can reduce its effective travel. Check the fasteners once the suspension settles, and recheck them after the first few drives.
- Check for oil or dampness on the shock body
- Inspect the bushings and mounts for cracks
- Look for uneven rear tire wear
- Confirm brake hose clearance through full travel
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 924510 (also shown as EXP924510) |
| UPC | 614901071856 |
| Product type | Shock absorber |
| Series | ES9000 |
| Position | Rear |
| Lift height | 2-4 in. lift |
| Extended length | 24.70 inches |
| Collapsed length | 14.52 inches |
| Travel length | 10.18 inches |
| Upper mount | Stem |
| Lower mount | Loop |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Type | Gas charged |
| Sold as | Each |
| Fitment type | Direct fit |
Vehicle fitment
This is a direct fit for the rear position with a 2-4 in. lift. Confirm fit for your vehicle’s year, model and trim before ordering, and check the shock’s length against your suspension.
Do not assume the shock suits a vehicle that has not been confirmed by the manufacturer. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Suspension components affect handling and braking, so professional installation is a sound choice for this shock. Tighten all fasteners to their specified torque before driving.
- Have the alignment checked after any suspension work.
- Check tire clearance and brake hose and wiring length through the full range of travel.
- Re-check fasteners after the first miles of driving.
- Check your local regulations on suspension height changes.
- Shocks are best replaced in pairs so the left and right sides match.
What’s included
One shock, sold individually.
Not included: Shock boots are sold separately and are not included.











