Overview
The Pro Comp 921523 is a rear ES9000 Series gas charged shock absorber sold individually for the 1959 to 1974 Land Rover. It is designed for the Base version.
The shock is 21.52 inches extended and 12.97 inches collapsed, which gives 8.55 inches of travel. Pro Comp rates it for a 0 to 1 inch lift, and both mounts are factory style. The twin tube body uses a nylon banded piston head, double welded mounts and 10 stage velocity sensitive valving.
Key features
- Rear position for classic Land Rover
- Gas charged twin tube design
- 10 stage velocity sensitive valving
- 1 3/8 inch nylon banded full displacement piston head
- Double welded shock mounts
Classic Land Rover rear shocks
Classic Land Rover rear suspensions rely on leaf springs and simple shock mounts, and the bushings and bolts at each end are the parts most likely to wear. Worn mounts can allow the shock to move in its bracket, creating knocking over bumps. Inspecting the eyes, pins and hardware during any shock replacement is a sensible step on a vehicle of this age.
Keeping the rear shock near stock height matters on a classic Land Rover, since the springs, body mounts and driveline angles were designed around that position. Check the spring condition and bump stops along with the shock. Replacing a worn rear shock on one side only can leave the rear end uneven, so inspect the opposite side as well.
- Inspect eyes and pins for wear
- Check leaf springs for sag
- Compare both rear shocks for matching wear
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 921523 |
| UPC | 614901071412 |
| Shock series | ES9000 |
| Position | Rear |
| Extended length | 21.52 in |
| Collapsed length | 12.97 in |
| Travel length | 8.55 in |
| Upper mount | Factory |
| Lower mount | Factory |
| Gas charged or hydraulic | Gas charged |
| Lift range | 0 to 1 in |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Each |
Vehicle fitment
It fits the 1959 to 1974 Land Rover in Base trim.
Later Land Rover models, including those from after 1974, are not on this entry. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Factory mounts at both ends are meant to keep the shock in the original rear location. The 0 to 1 inch lift range means the shock suits a Land Rover close to stock height.
What’s included
One rear shock, sold as each, with no boot supplied.








