Select your vehicle
-13%

Pro Comp Pro Runner SS Monotube Shock Absorber – ZX2111

Pro Comp Suspension

Shop Ford F-150 Shock Absorbers on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Pro Comp Pro Runner SS front shock, part number ZX2111
  • Height-adjustable collar raises the front up to 2.75 in
  • Clears 35 inch tires
  • Fits the 2014 Ford F-150
  • Retains factory coil spring; coil not included

Description

Overview

The ZX2111 is a front Pro Runner SS shock absorber for the 2014 Ford F-150. It is built for late model trucks and SUVs with coil-over, strut-style independent front suspensions, and it clears 35 inch tires.

The defining feature is a height-adjustable collar that Pro Comp describes as patent pending and 180 degrees in rotation. Using the collar, the owner can raise the front of the truck up to 2.75 inches to fit larger tires, or keep the truck at factory ride height. The shock retains the factory coil spring, which is not included.

The body is nitrogen charged, with a 2 inch diameter and a zinc plated, clear coated finish. The gas charge reduces cavitation during compression and rebound, and the valving is set for the application to give a smooth ride on pavement and control off road.

Key features

  • Front position, direct fit for the 2014 Ford F-150
  • Height-adjustable collar, patent pending
  • Raises the front up to 2.75 in
  • Clears 35 inch tires
  • Nitrogen charged 2 inch body with zinc plated finish

Choosing a collar setting

A height-adjustable collar gives the owner a choice between factory ride height and a raised setting. The right choice depends on the tires being run, the load carried and how much clearance is needed at full steering lock. Setting the collar before the truck is driven keeps the front end from shifting while it is in use.

Raising the front changes the geometry of the strut, the spring position and the bump stop engagement, so the ride may feel firmer or less settled. After any height change, check the alignment, look for rubbing at the tire and fender, and inspect the sway bar end links. Keeping a note of the collar setting helps when the truck is serviced later.

  • Set the collar before the first drive
  • Check tire clearance at full steering lock
  • Recheck the alignment after a height change
  • Inspect fender liners for rub

Specifications

Brand Pro Comp Suspension
Part number ZX2111
UPC 614901137132
Shock series Pro Runner SS
Position Front
Lift height 0 in. lift or drop, adjustable up to 2.75 in.
Tire clearance 35 in tires
Body diameter 2 in
Charge Nitrogen, gas charged
Finish Zinc plated, clear coated
Coil spring Factory coil retained, not included

Vehicle fitment

It is a direct fit for the 2014 Ford F-150, including the FX2, FX4, King Ranch, Lariat, Limited, Platinum, STX, XL and XLT models.

The list covers 2014 only, so other F-150 model years are not included. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Set the collar to the height you want before the truck is driven, then check tire clearance at full steering lock. The 35 inch clearance figure applies to the raised setting.

What’s included

One front Pro Runner SS shock with height-adjustable collar and boot. The coil spring is not included.

SKU: EXPZX2111 Category:

Specification

Shipping weight 11.00 lbs
Package dimensions 25.00 × 6.00 × 6.00 in
brands

Fitment

VehicleYearsTrims
Ford F-1502014FX2, FX4, King Ranch, Lariat, Limited, Platinum, STX, XL, XLT

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will the ZX2111 fit a 2014 Ford F-150?

Yes. It fits the 2014 Ford F-150 in the front position. Verify the year, model and trim against your truck, since fit covers 2014 only.

Does the ZX2111 clear 35 inch tires?

Yes. The height-adjustable collar raises the front up to 2.75 inches to clear 35 inch tires, or keeps the truck at factory ride height, so the owner picks the setting.

Does the ZX2111 come with a coil spring?

No. It retains the factory coil spring, which is not included with the shock, so the existing coil stays in use after installation.

Does raising the collar affect the ride?

Yes. Raising the front changes the spring position and bump stop engagement, so the ride can feel firmer or less settled than at factory height. Drive the truck at low speed after any change to confirm it tracks straight and that the tires clear the fender.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Ford F-150 Shock Absorbers on Amazon