Overview
It is a rear ES9000 Series shock from Pro Comp Suspension, made for a 6 inch rear lift. The boot is not included.
Matching a replacement rear shock
A rear shock controls how the axle moves over bumps and under braking, and a lift changes the angle and travel the shock works through. When the suspension is raised, the shock’s extended and compressed lengths matter as much as its damping. Measuring the shock you are removing, with the vehicle at rest and the axle supported, gives a useful reference before any new part is bought.
Mount style matters as much as length. Eye, stud and bushing ends differ between brands, and a shock that fits the body end may still need different hardware at the axle. Check that the bushings and bolts are the correct size before the old shock comes off, so the install does not stall partway through.
- Compare extended and compressed lengths, not just overall length
- Confirm mount type at both ends
- Inspect the upper and lower bushings during installation
- Replace shocks in pairs when one side is worn
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 934005 |
| UPC | 614901236743 |
| Shock series | ES9000 |
| Position | Rear |
| Lift | 6 inch rear lift |
| Boot | Not included |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering. Check the shock’s length and the 6 inch rear lift against your suspension before buying.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One ES9000 Series rear shock.
Not included: dust boot.






















