Select your vehicle

Pro Comp ES9000 Series Shock Absorber – 932003

Pro Comp Suspension

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Rear gas-charged ES9000 shock, part number 932003, with factory upper and lower mounts
  • Designed for a 2.5 to 4 in. lift
  • Description gives 32.83 in. extended and 18.82 in. collapsed
  • 10-stage velocity-sensitive valving, 1 3/8 in. piston head

Description

Overview

The Pro Comp ES9000 part 932003 is a rear gas-charged shock absorber designed for a 2.5 to 4 inch lift. It has factory upper and lower mounts and measures 32.83 inches extended and 18.82 inches collapsed.

The shock is built around a twin-tube body with 10-stage velocity-sensitive valving. A 1 3/8 inch nylon-banded piston head provides the damping, and double-welded mounts add strength. The design supports a smooth ride on the highway and better handling on rough terrain.

Key features

  • Rear placement for a 2.5 to 4 inch lift
  • 10-stage velocity-sensitive valving
  • 1 3/8 inch nylon-banded, full-displacement piston head
  • Double-welded shock mounts with factory upper and lower fittings

Lift height and shock length

A rear shock works within a specific range of lengths, and a lift changes how far it needs to reach. If the suspension has been lifted, the shock must be able to extend and compress without bottoming out or running out of travel. Measure the shock being replaced first, then check that its range fits the lift on your vehicle.

Rear shocks interact with leaf springs, coil springs and the axle, so any spring change should be planned along with the shock. A shock that is too short can strain the mounts, while one that is too long may keep the suspension from settling. Inspect the mounts and bushings during installation.

  • Measure the old unit before ordering
  • Check mounts for wear
  • Confirm the lift height used on the truck

Specifications

Brand Pro Comp Suspension
Part number 932003
UPC 614901072754
Shock series ES9000
Position Rear
Lift height 2.5 to 4 in.
Extended length 32.83 in. (description); vehicle specific (specification entry)
Collapsed length 18.82 in. (description); vehicle specific (specification entry)
Gas charged Yes
Piston head 1 3/8 in., nylon-banded, full displacement
Upper and lower mounts Factory
Adjustable No
Finish White
Boot included No

Vehicle fitment

Confirm fit for your vehicle’s year, model and trim before ordering, and make sure your suspension’s lift falls within 2.5 to 4 inches.

Installation notes

Measure the shock being replaced before installing, and compare it with the 32.83 in. extended length.

What’s included

The package is one gas-charged rear shock, with no boot.

SKU: EXP932003 Category:

Specification

Shipping weight 8.00 lbs
Package dimensions 25.00 × 3.00 × 3.00 in
brands

Questions & Answers

Is the Pro Comp 932003 a front or rear shock?

It is a rear shock. Part 932003 is listed with the position Rear and is designed for a vehicle with a 2.5 to 4 inch lift.

Which lift height does the ES9000 932003 suit?

The listed lift range is 2.5 to 4 inches. Check your suspension height before installing, because lengths and mounting depend on how the vehicle is lifted.

Does the 932003 come with a boot?

No. The boot is not included with part 932003, and the shock is sold as each. Add a boot separately if your setup calls for one.

Can a rear shock be used on a truck without a lift?

Confirm the lift before ordering. Check the suspension height, then compare the shock's length with the old unit. A mismatch can strain the mounts or limit suspension movement.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon