Overview
The Pro Comp ES9000 (part number 913514) is a nitrogen gas charged shock absorber with a twin tube design. Pro Comp built it for drivers who carry heavy loads or drive in demanding conditions, and it uses 10-stage velocity sensitive valving to keep highway driving smooth while improving off-road handling and performance.
The piston head is a 1 3/8 inch nylon banded full displacement design, which Pro Comp says gives the shock its capacity for heavy loads. Double welded shock mounts add strength at both ends of the shock. The UPC for this part is 614901070057.
Key features
- Nitrogen gas charged twin tube design
- 10-stage velocity sensitive valving
- 1 3/8 inch nylon banded full displacement piston head
- Double welded shock mounts for maximum strength
- Built for heavy loads and demanding driving
Choosing a replacement shock
A twin tube gas shock controls body movement by forcing fluid through internal valving as the suspension compresses and extends. Valving sets how firmly the shock resists those movements, so a shock with velocity sensitive valving responds differently to slow highway motion and quick trail impacts. The gas charge helps limit foaming of the oil during repeated firm strokes, which supports steady damping over longer runs.
Before buying, measure the old shock’s collapsed and extended lengths, check the mount style at both ends, and confirm the vehicle’s suspension height. Shocks are often replaced in pairs on the same axle so damping stays balanced from side to side. Coil springs, bushings and mounts that show wear are worth inspecting at the same time, since worn parts change how a new shock performs.
- Look for leaking fluid or an oil film on the shock body
- Check mounts and bushings for cracks or play
- Replace shocks in pairs on the same axle
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 913514 |
| UPC | 614901070057 |
| Gas charge | Nitrogen |
| Shock design | Twin tube |
| Piston head | 1 3/8 inch nylon banded, full displacement |
| Valving | 10-stage velocity sensitive |
| Shock mounts | Double welded |
| Fit type | Universal fit |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering. Shock length, mount style and travel vary from one vehicle to the next, so measure your current shock’s extended and collapsed lengths and compare the mount style first.
Measure your current shock’s extended and collapsed lengths and compare the mount style before choosing this shock.























