Overview
The Pro Comp Suspension ES3000 320500 is a rear hydraulic shock absorber for small trucks and SUVs. It fits the 1983–2004 Chevrolet S10, the 1995–2005 Chevrolet Blazer, the 1998–2003 Nissan Frontier, the 1983–1993 Dodge Ram 50, the 1992–2001 GMC Jimmy and the 1970–1974 Toyota Hi-Lux, among others. The shock is 20.59 in extended, 12.70 in collapsed and has 7.89 in of travel. It has loop mounts at both ends and is rated for 0 to 1.5 in. of lift. The ES3000 is a twin tube cellular gas design with 10-stage velocity-sensitive valving, and it carries the Pro Comp Suspension limited lifetime warranty.
The shock is 20.59 in extended, 12.70 in collapsed and has 7.89 in of travel. It has loop mounts at both ends and is rated for 0 to 1.5 in. of lift. The ES3000 is a twin tube cellular gas design with 10-stage velocity-sensitive valving, and it carries the Pro Comp Suspension limited lifetime warranty.
Key features
- Twin tube cellular gas design
- 10-stage velocity-sensitive valving
- 5/8 inch chrome-hardened piston rod
- Teflon rebound stop
- Double welded shock mounts
- Loop upper and lower mounts
- Rated for 0 to 1.5 in. of lift
- Pro Comp Suspension limited lifetime warranty
Rear shock basics
Rear shocks handle most of the body motion when a truck leaves pavement, and on pickups and small SUVs they also help control axle hop under load. A shock that has lost damping lets the rear end bounce after dips and can make the tail feel loose on washboard roads. Loop mounts are common on older small trucks and are usually bolted through a rubber bushing.
When choosing a replacement, match the mount style and extended length before anything else, then consider how the truck is loaded. Leaf spring and coil spring rear ends can react differently, so keep the springs and bushings in good condition. Inspect the shock every few oil changes for leaks, cracked eyes and worn rubber.
- Check the spring perches and bump stops
- Replace worn bushings at the same time
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 320500 |
| UPC | 614901041095 |
| Shock series | ES3000 |
| Position | Rear |
| Type | Hydraulic, twin tube cellular gas design |
| Extended length | 20.59 in |
| Collapsed length | 12.70 in |
| Travel length | 7.89 in |
| Upper mount | Loop |
| Lower mount | Loop |
| Lift height rating | 0 to 1.5 in. of lift |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Each |
Vehicle fitment
Fits the 1995–2005 Chevrolet Blazer (Base, LS, LT and ZR2), the 1983–2004 Chevrolet S10 (Baja, Base, Durango, EL, LS, Sport, Tahoe, ZR2 and ZR5), the 1983–1994 Chevrolet S10 Blazer, the 1987–1989 Dodge Raider, the 1983–1993 Dodge Ram 50, the 1992–2001 GMC Jimmy, the 1983–1990 and 1983–1991 GMC S15 models, the 1986–1987 and 1987–1993 Mazda B-series trucks, the 1986 Nissan D21, the 1998–2003 Nissan Frontier, the 1979–1982 Plymouth Arrow Pickup and the 1970–1995 Toyota Pickup.
Chevrolet S10 and Blazer years outside the ranges above, and the 2006 and newer Chevrolet Blazer, are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This rear shock is rated for 0 to 1.5 in. of lift, so it suits vehicles at or near stock height. Compare the 20.59 in extended and 12.70 in collapsed lengths with the shock you are removing before fitting. Keep the vehicle securely on stands while the old shock comes out.
What’s included
One ES3000 shock.
Not included: the dust boot.










