Overview
The Pro Comp Suspension ES3000 325514 is a hydraulic shock absorber from the ES3000 Series. Its lengths are vehicle specific, and it mounts at the factory upper and lower points. The shock is finished in white and sold as each. Pro Comp names no position for this shock, so confirm whether your vehicle needs a front or rear unit.
The ES3000 uses a twin tube cellular gas design with 10-stage velocity-sensitive valving. Its 5/8 inch chrome-hardened piston rod and Teflon rebound stop support a comfortable ride on the highway and control in harder driving, and the double welded mounts add strength. The Pro Comp Suspension limited lifetime warranty applies.
Key features
- Twin tube cellular gas design
- 10-stage velocity-sensitive valving
- 5/8 inch chrome-hardened piston rod
- Teflon rebound stop
- Double welded shock mounts
- Factory upper and lower mounts
- White finish
- Pro Comp Suspension limited lifetime warranty
Choosing a replacement shock
A shock absorber controls how quickly the spring and suspension move after a bump, so the tires stay in contact with the ground. Hydraulic twin tube designs use a fluid-filled body and a valve stack to manage that motion. When you replace one, the goal is a damper that controls the ride without making the truck feel harder than it did before. Matching the length, mount style and finish to the original keeps the suspension geometry close to the factory setup.
Most owners replace shocks in pairs on the same axle so both sides respond the same way. Look at the rest of the suspension too, including bushings, mounts and spring condition, because worn parts can shorten the life of a new shock. Note the old shock’s mounting points and measurements before removing it, which makes comparison easier before you buy.
- Compare the old shock’s mounts before ordering
- Replace in pairs on the same axle
- Inspect bushings and hardware at the same time
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 325514 |
| UPC | 614901042276 |
| Shock series | ES3000 |
| Type | Hydraulic, twin tube cellular gas design |
| Extended, collapsed and travel lengths | Vehicle specific |
| Upper mount | Factory |
| Lower mount | Factory |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Each |
Vehicle fitment
Check fit against your vehicle before ordering. Compare the factory mount points and vehicle-specific lengths with the shock you are replacing.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One shock absorber, part 325514.
Not included: the dust boot.







