Overview
The Pro Comp ES3000 Series rear shock, part number 329503, fits 1972 to 1993 Dodge W-series pickups, including the W100, W150, W200, W250, W300 and W350 models. It is rated for 0 to 2 in. of lift and uses the factory upper and lower mounts.
The ES3000 is a twin-tube, gas-charged shock with 10-stage velocity-sensitive valving. Dodge W-series trucks were built across many years, so the lengths are vehicle specific and should be matched against the original shock.
Key features
- 10-stage velocity-sensitive valving for damping that changes with speed.
- A 5/8 inch chrome-hardened piston rod.
- A Teflon rebound stop for a smoother return stroke.
- Double-welded mounts.
- Limited lifetime warranty from Pro Comp.
Shocks on older work trucks
Older full-size pickups were often used for hauling and towing, and that work puts sustained load on the rear damping. Over time, the valving can lose its control and the rear end may wallow after a loaded trip. Because the suspension of these trucks has aged, the mounting points and bushings are worth examining whenever a shock is replaced.
A gas-charged design helps keep damping consistent when the shock heats up during long runs. For a truck that sees mixed use, a shock that is matched to the actual height of the suspension performs better than one chosen only by model year. Keep spare hardware on hand and check the mounts after the first few hundred miles of new use.
- Check mount bushings and bolts
- Match shock height to suspension height
- Inspect the rear end after loaded trips
- Replace shocks as a matched pair
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 329503 |
| UPC | 614901042771 |
| Shock series | ES3000 |
| Extended length | Vehicle specific |
| Collapsed length | Vehicle specific |
| Travel length | Vehicle specific |
| Upper mount | Factory |
| Lower mount | Factory |
| Position | Rear |
| Lift rating | 0 to 2 in. lift |
| Adjustable | No |
| Finish | White |
| Dust boot included | No |
| Sold as | Each |
Vehicle fitment
It fits the 1976 to 1977 and 1986 to 1989 Dodge W100, 1977 to 1993 W150, 1972 to 1980 W200 and W300, and 1981 to 1993 W250 and W350 trucks. Confirm fit for your vehicle’s year, model and trim before buying.
The list has no W100 entries for 1978 to 1985, and no Dodge W-series entries for 1994 or later. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The rating is 0 to 2 in. of lift, so the shock suits a stock or lightly raised W-series truck. Compare the mounting points on the old shock with the factory mounts before you order.
What’s included
One ES3000 shock absorber.
Not included: the dust boot. The shock is sold without one.











