Overview
The Pro Comp Suspension ES3000 320506 is a hydraulic shock absorber from the ES3000 Series with loop mounts at both ends. It measures 20.59 in extended and 12.70 in collapsed, and it has 7.89 in of travel. No vehicle is named for this part number, so the lengths are the main points to compare with the shock you are replacing.
The ES3000 is a twin tube cellular gas shock. Its 10-stage velocity-sensitive valving changes damping with the speed of movement, and the 5/8 inch chrome-hardened piston rod pairs with a Teflon rebound stop. Double welded mounts and a limited lifetime warranty from Pro Comp Suspension complete the design. It is suited to highway driving and harder use.
Key features
- Twin tube cellular gas design
- 10-stage velocity-sensitive valving
- 5/8 inch chrome-hardened piston rod
- Teflon rebound stop
- Double welded shock mounts
- Loop upper and lower mounts
- White finish, non-adjustable
- Pro Comp Suspension limited lifetime warranty
Measuring before installation
Lengths are the first thing to check. Measure the shock being removed fully extended and fully compressed, then compare those readings with the 20.59 in extended and 12.70 in collapsed lengths of this shock. A shock that is too long can bind at full droop, while one that is too short can bottom out or pull on the mounts.
Loop mounts use an eye and a bushing at each end, so the bushings should be checked for cracks, flattening and play. Replacing a worn bushing often costs less than a new shock and restores the original feel. Check the rebound stop and the clearance to the frame or axle while the suspension is cycled by hand. Replace shocks in pairs on the same axle so the ride stays even.
- Eyes and bushings free of cracks
- Clearance at full compression
- Matched pair on each axle
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 320506 |
| UPC | 614901041125 |
| Shock series | ES3000 |
| Type | Hydraulic, twin tube cellular gas design |
| Extended length | 20.59 in |
| Collapsed length | 12.70 in |
| Travel length | 7.89 in |
| Upper mount | Loop |
| Lower mount | Loop |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Each |
Vehicle fitment
Fit is not confirmed for the 320506 yet, so check your truck’s year, model and trim before ordering. Compare the 20.59 in extended and 12.70 in collapsed lengths and the loop mounts with the shock on the vehicle.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One shock absorber, part 320506.
Not included: the dust boot.











