Overview
The Pro Comp Suspension ES3000 324504 is a rear hydraulic shock absorber for the 1997–2002 Ford Expedition Eddie Bauer and XLT models. It uses factory upper and lower mounts, and its lengths are vehicle specific.
It has a twin tube cellular gas body, 10-stage velocity-sensitive valving, a Teflon rebound stop and a 5/8 inch chrome-hardened piston rod. It is suited to comfortable highway driving and demanding conditions, and the double welded mounts are covered by the Pro Comp Suspension limited lifetime warranty. It is rated for a 2 to 3 in. lift.
Key features
- Twin tube cellular gas design
- 10-stage velocity-sensitive valving
- 5/8 inch chrome-hardened piston rod
- Teflon rebound stop
- Double welded shock mounts
- Factory upper and lower mounts
- Rear position, rated for a 2 to 3 in. lift
- Pro Comp Suspension limited lifetime warranty
Lift and shock travel
Adding lift changes how far the suspension travels, and the rear shock has to cover that extra range. Shock length and travel should be checked against the new ride height, not only the stock height. When a lift is added, the shock can reach full extension sooner, which is where worn valving and bushings are most likely to show.
A moderate lift is easier on shocks when the rest of the suspension is set up to match. Brake lines, fuel lines and the driveshaft need clearance at full droop. Shocks often wear faster on lifted trucks driven hard off road, so inspection after each season of heavy use is a good habit.
- Measure ride height at all four corners before fitting
- Check brake and fuel line clearance at full droop
- Inspect bump stops after any suspension change
- Consider matching front shocks for even damping
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 324504 |
| UPC | 614901041934 |
| Shock series | ES3000 |
| Position | Rear |
| Type | Hydraulic, twin tube cellular gas design |
| Extended, collapsed and travel lengths | Vehicle specific |
| Upper mount | Factory |
| Lower mount | Factory |
| Lift height rating | 2 to 3 in. lift |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Each |
Vehicle fitment
It fits the 1997–2002 Ford Expedition in the Eddie Bauer and XLT versions.
Ford Expeditions from 2003 and later, and the 1996 and earlier Expedition, are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The 2 to 3 in. lift rating means the shock is meant for an Expedition with a modest lift. Check your Expedition’s suspension height before fitting, and compare the vehicle-specific lengths with the old rear shock.
What’s included
One shock absorber, part 324504.
Not included: the dust boot.












