Select your vehicle

Pro Comp ES3000 Series Shock Absorber – 321520

Pro Comp Suspension

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Pro Comp ES3000 Series shock, part 321520, white finish
  • Vehicle-specific extended, collapsed and travel lengths
  • Factory upper and lower mounts
  • Hydraulic, non-adjustable, sold as each

Description

Overview

The Pro Comp Suspension ES3000 321520 is a hydraulic shock absorber from the ES3000 Series. Its extended, collapsed and travel lengths are vehicle specific, and it uses the factory upper and lower mounts. The shock is finished in white and sold as each.

Damping is handled by 10-stage velocity-sensitive valving inside a twin tube cellular gas shock. A 5/8 inch chrome-hardened piston rod and Teflon rebound stop are built into the shock, and the double welded mounts are intended for strength. Pro Comp covers the shock with its limited lifetime warranty. Vehicle-specific lengths mean the figures should be compared with the shock you are removing.

Key features

  • Twin tube cellular gas design
  • 10-stage velocity-sensitive valving
  • 5/8 inch chrome-hardened piston rod
  • Teflon rebound stop
  • Double welded shock mounts
  • Factory upper and lower mounts
  • White finish
  • Pro Comp Suspension limited lifetime warranty

Replacing shocks on both sides

Shocks on the same axle work as a pair, so replacing one side alone can leave the vehicle pulling or leaning in corners. Matching both sides keeps damping even and reduces the chance of one side bottoming out before the other. When working on a front axle, check the steering components while the shock is out, since loose tie rod ends or worn ball joints show up as wandering and uneven tire wear.

Old springs and bushings also affect shock life. Sagging springs change the range in which the shock works, and cracked rubber at the mounts passes vibration into the body. Clean the mounting surfaces before installing, and tighten the fasteners once the vehicle is back on the ground.

  • Replace both shocks on the same axle
  • Check tie rod ends and ball joints
  • Inspect spring seats and bushings
  • Clean the mounting surfaces

Specifications

Brand Pro Comp Suspension
Part number 321520
UPC 614901041477
Shock series ES3000
Type Hydraulic, twin tube cellular gas design
Extended, collapsed and travel lengths Vehicle specific
Upper mount Factory
Lower mount Factory
Adjustable No
Remote reservoir No
Finish White
Boot included No
Sold as Each

Vehicle fitment

Before ordering, set the factory mount points and vehicle-specific lengths against the shock you are removing.

Confirm your vehicle’s year, model and trim before ordering.

What’s included

One shock absorber, part 321520.

Not included: the dust boot.

SKU: EXP321520 Category:

Specification

Shipping weight 6.00 lbs
Package dimensions 25.00 × 3.00 × 3.00 in
brands

Questions & Answers

Does the Pro Comp ES3000 321520 have a fitment list?

Confirm your year, model and trim before ordering, and set the factory mounts and vehicle-specific lengths side by side with the old shock.

Is the 321520 adjustable?

No. It is a non-adjustable hydraulic shock with 10-stage velocity-sensitive valving and factory upper and lower mounts. The finish is white.

Does the 321520 come with a boot?

No. The dust boot is not included with the 321520. The shock uses factory upper and lower mounts with vehicle-specific lengths.

Should shocks be replaced in pairs?

Usually yes. Shocks on the same axle should match in damping, so replacing one side alone can cause uneven control. Replacing both keeps the vehicle balanced and reduces the chance that the new shock wears faster than its partner.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon