Overview
The ES3000 front shock absorber, part number 332002, uses factory upper and lower mounts. Its extended, collapsed and travel lengths are vehicle specific.
The lift rating for this part is printed as “w/10 – 9 in. Lift,” which does not read as a usable range. Treat that field as unconfirmed, and check the lift with Pro Comp before you order if your truck is raised. The rest of the design follows the ES3000 line: a twin-tube, gas-charged shock with 10-stage velocity-sensitive valving.
This is a front shock with factory mounts.
Key features
- 10-stage velocity-sensitive valving for damping that follows the speed of movement.
- A 5/8 inch chrome-hardened piston rod.
- A Teflon rebound stop.
- Double-welded shock mounts.
- Limited lifetime warranty from Pro Comp.
Front suspension work
A front shock controls the movement between the axle and the frame, and it works hard during braking, cornering and steering. Its damping affects how the front end settles after a dip, which shows up as wander or nose dive on the highway. Because the front unit carries a different load than the rear, it needs to be matched to the front position rather than swapped with a rear shock.
Check the compressed and extended lengths against the travel the suspension allows, and look at the bump stops for wear or damage. Front shocks often wear alongside the steering components, so inspect the ball joints, tie rod ends and mounts when the shock is off. Replace front shocks in pairs so the steering responds the same way from side to side.
- Oil on the body
- Uneven front tire wear
- Clunks over bumps
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 332002 |
| UPC | 614901695953 |
| Shock series | ES3000 |
| Extended length | Vehicle specific |
| Collapsed length | Vehicle specific |
| Travel length | Vehicle specific |
| Upper mount | Factory |
| Lower mount | Factory |
| Position | Front |
| Lift rating | Unclear; confirm the lift rating before ordering |
| Adjustable | No |
| Finish | White |
| Dust boot included | No |
| Sold as | Each |
Vehicle fitment
Fit is not confirmed for part 332002. Check your vehicle’s year, model and trim, and measure the front shock you are replacing before choosing this part.
Because the lift rating is unclear and the lengths are vehicle specific, confirm the application first. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A front shock works between the axle and the frame, so check the compressed and extended lengths against your suspension travel before you install it.
What’s included
One ES3000 front shock absorber.
Not included: the dust boot, so one must be bought separately if your application uses a boot.









