Overview
The Pro Comp Pro Runner ZX2039 is a rear gas-charged monotube shock absorber designed for a 1 to 1.5 inch lift. It fits the 2011 to 2013 Chevrolet Silverado 2500 HD and 3500 HD, the 2011 to 2013 GMC Sierra 2500 HD and 3500 HD, and the 2013 GMC Sierra 1500. Compare its lengths with the shock being replaced before ordering.
Its ride tuning and multi-stage valving were developed through dyno and real-world testing for this application. The zinc plated, clear coated body is nitrogen pressurized, which reduces cavitation and helps the shock move heat away more efficiently.
Heavy-duty trucks and one 1500 model share this part, so confirm the model year and cab type before fitting.
Key features
- Rear placement for a 1 to 1.5 inch lift
- Multi-stage valving
- Nitrogen gas charge
- Zinc plated, clear coated body
- Boot included
Choosing the right setup
Rear shocks do most of the damping work when a truck is loaded, towing or crossing washboard sections. A monotube design keeps the piston and gas charge in one tube, which helps damping hold steady when the shock runs warm on longer trips. When choosing a replacement, match the mount style and installed length to the shock coming off, and keep the lift range in mind so the shock is not working at the edge of its travel.
Rear shocks are often replaced in pairs so both sides ride the same way. Bump stops, leaf spring hardware and rear bushings are worth inspecting at the same time, since worn parts change how the shock is loaded. A cracked boot or oil on the body is a sign the shock is past its service life and should be replaced rather than cleaned.
- Replace rear shocks in pairs where possible
- Inspect bump stops and bushings during install
- Check the boot for cracks or tears
- Look for oil on the shock body
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | ZX2039 |
| UPC | 614901024425 |
| Shock series | Pro Runner |
| Position | Rear |
| Lift height | 1 to 1.5 in. |
| Gas charged | Yes, nitrogen |
| Finish | Zinc plated, clear coated |
Vehicle fitment
It fits the 2011 to 2013 Chevrolet Silverado 2500 HD and 3500 HD, the 2013 GMC Sierra 1500, and the 2011 to 2013 GMC Sierra 2500 HD and 3500 HD.
Silverado 1500 models, and HD years outside 2011–2013, are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The lift range is 1 to 1.5 inches, so compare it with your truck’s current height before fitting the rear shock.
What’s included
One rear monotube shock, with its boot.




























