Overview
The Pro Comp ES3000 Series shock absorber, part number 326553, is a replacement-style shock that uses the factory upper and lower mounts. Its extended, collapsed and travel lengths are vehicle specific.
The ES3000 is a twin-tube, gas-charged shock. The gas charge reduces oil foaming under repeated hard use, and the internal valving controls how fast the shock responds to movement over bumps. Because the length is vehicle specific, the correct length comes from the application rather than from a catalog number, so match the part to your truck before you buy.
Key features
- 10-stage velocity-sensitive valving that changes damping with the speed of the movement.
- A 5/8 inch chrome-hardened piston rod for durability at the seals.
- A Teflon rebound stop for a comfortable ride on the highway.
- Double-welded shock mounts for strength where the shock attaches.
- Limited lifetime warranty from Pro Comp.
Measuring before you buy
Because the lengths on this type of shock are vehicle specific, measuring the unit you are removing is the most reliable step before buying. Measure extended and collapsed length with the truck at its normal ride height, and note the mount style at each end. Those two figures decide whether a replacement will fit.
Gas-charged hydraulic shocks handle repeated hard use well, but seal wear eventually shows up as oil on the body or a loss of control over bumps. Replacing a shock on one side can leave the two sides uneven, so many owners replace both shocks on the same axle at the same time.
- Record the old shock’s extended and collapsed length
- Check both mounts for wear before fitting
- Note whether the old shock had a dust boot
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 326553 |
| UPC | 614901042603 |
| Shock series | ES3000 |
| Extended length | Vehicle specific |
| Collapsed length | Vehicle specific |
| Travel length | Vehicle specific |
| Upper mount | Factory |
| Lower mount | Factory |
| Adjustable | No |
| Remote reservoir | No |
| Body type | Hydraulic / gas charged |
| Finish | White |
| Dust boot included | No |
| Sold as | Each |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering. Check the shock length and mount style against your truck, since the lengths are vehicle specific.
Because this shock uses factory mounts, a match depends on the original shock being the same design. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Factory mounts mean the new shock should reuse the original mounting points. Measure the extended and collapsed length of the shock you are removing and compare them with the vehicle-specific values before you order.
What’s included
One ES3000 shock absorber.
Not included: the dust boot.












