Overview
The Pro Comp Suspension ES3000 321510 is a front hydraulic shock absorber for Ford trucks and SUVs. It fits the 1980–1996 Ford Bronco, the 1975–1996 Ford F-150, the 1983–1997 Ford Ranger and the 1999–2012 Ford F-250 and F-350 Super Duty. It also fits the 1970–1983 Ford F-100, the 2000–2005 Ford Excursion and the 1961–1971 International Scout.
The shock measures 21.75 in extended and 13.06 in collapsed, with 8.69 in of travel. It has a stem at the top and a loop at the bottom, and Pro Comp rates it for a 6 in. lift. The ES3000 is a twin tube cellular gas design with 10-stage velocity-sensitive valving, a 5/8 inch chrome-hardened piston rod and a Teflon rebound stop, and it carries the Pro Comp Suspension limited lifetime warranty.
Key features
- Twin tube cellular gas design
- 10-stage velocity-sensitive valving
- 5/8 inch chrome-hardened piston rod
- Teflon rebound stop
- Double welded shock mounts
- Stem upper mount and loop lower mount
- Rated for a 6 in. lift
- Pro Comp Suspension limited lifetime warranty
Setting up for lift height
Lift height changes the geometry of the suspension, so the shock must reach its full travel without bottoming out or hanging up. On a lifted truck, the old shock may be too short for the new ride height, which makes extended length an important check before installation.
Front shocks also affect steering and braking. Damping that is too soft lets the front end dive and wander, while worn steering components can make a new shock feel out of place. Inspect ball joints, tie rod ends and control arm bushings while the shock is off, because loose steering parts change how the shock works.
- Measure the old shock’s extended and collapsed lengths
- Inspect the stem and loop mounting hardware for wear
- Check for bump stop contact at full compression
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 321510 |
| UPC | 614901041354 |
| Shock series | ES3000 |
| Position | Front |
| Type | Hydraulic, twin tube cellular gas design |
| Extended length | 21.75 in |
| Collapsed length | 13.06 in |
| Travel length | 8.69 in |
| Upper mount | Stem |
| Lower mount | Loop |
| Lift height rating | 6 in. lift |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Each |
Vehicle fitment
It fits the 1980–1996 Ford Bronco (Custom, Eddie Bauer, Ranger XLT, XL, XLS, XLT, XLT Lariat, XLT Nite and XLT Sport), the 1984–1990 Ford Bronco II, the 2000–2005 Ford Excursion (Eddie Bauer, Limited, XLS and XLT), the 1970–1983 Ford F-100, the 1975–1996 Ford F-150, the 1993–1995 Ford F-150 Lightning, the 1970–1980 and 1999 Ford F-250, the 1999–2012 Ford F-250 and F-350 Super Duty (King Ranch, Lariat, XL and XLT), the 1983–1997 Ford Ranger, the 1996–1997 Honda Passport (DX, EX and LX), the 1961–1971 International Scout, the 1971–1980 International Scout II and the 1991–1995 Isuzu Rodeo (LS, S and XS).
Ford Rangers from 1998 and later, the 1997 and later F-150, and the Ford Explorer are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The 6 in. lift rating means the shock is meant for a truck with that much suspension height. Several vehicle generations are on this list, so check the year and model against your truck before fitting. Compare the 21.75 in extended and 13.06 in collapsed lengths with the shock you are removing.
What’s included
One shock absorber, part 321510.
Not included: the dust boot.












