Overview
The ES3000 Series shock absorber, part 315515, is a front twin-tube design for select Ford trucks and SUVs. It uses a cellular gas design with 10-stage velocity-sensitive valving that adjusts to road conditions.
The 5/8-inch chrome hardened piston rod and Teflon rebound stop are built for a comfortable highway ride and demanding driving. The shock has double welded mounts and carries a limited lifetime warranty.
The shock is non-adjustable with no remote reservoir, and its boot is not included. Its stem upper mount and loop lower mount should be compared with the existing hardware. It fits several Ford full-size trucks and SUVs from the 1990s and early 2000s.
Key features
- 10-stage velocity sensitive valving
- 5/8-inch chrome hardened piston rod
- Teflon rebound stop
- Double welded shock mounts
- Limited lifetime warranty.
- Non-adjustable, with no remote reservoir
Twin-tube design basics
A twin-tube shock uses an inner working cylinder and an outer reserve tube. The piston moves oil through valves inside the inner tube, which produces damping. Twin-tube designs are a common choice for daily driving and light off-road use because they keep damping steady over repeated bumps.
When you install a new shock, confirm the mount type at each end, the extended and collapsed lengths and the rod diameter. Shocks that are too long can bind at full droop, and shocks that are too short can bottom out on a hard landing. Inspect the mounting bushings and bolts at the same time, and keep both sides matched.
- Look for oil seepage on the body
- Check mounts and bushings for play
- Replace shocks in pairs on the same axle
- Inspect the boot area if one is fitted
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 315515 |
| UPC | 614901040456 |
| Shock series | ES3000 |
| Position | Front |
| Extended length | 15.69 inches |
| Collapsed length | 10.02 inches |
| Travel length | 5.67 inches |
| Upper mount | Stem |
| Lower mount | Loop |
| Adjustable | No |
| Remote reservoir | No |
| Boot included | No |
| Lift or drop | None (0 inches) |
| Finish | White |
| Sold as | Each |
Vehicle fitment
It fits the 1997–2002 Ford Expedition, the 1991–1994 Ford Explorer, the 1991–1994 Explorer Sport, the 1997–2003 Ford F-150 and the 1999–2003 Ford F-150 Lightning.
Other Ford years and models, such as the F-150 from 2004 onward, are not in that list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The stem upper mount and loop lower mount have to match your vehicle’s existing hardware. Check both ends against the old shock before installing.
What’s included
One shock, sold as each. The boot is not included.











