Overview
The Pro Comp Pro Runner part ZX2015 is a gas-charged monotube shock absorber with a stem-style upper mount and a loop-style lower mount. It measures 20.85 inches extended, 13.74 inches collapsed and 7.11 inches of travel, and the specification entry marks it as not adjustable. No vehicle is named for this part number.
The Pro Runner line is tuned for late-model trucks, Jeeps and SUVs, with vehicle-specific ride tuning and multi-stage valving. The monotube body is brushed, zinc plated and clear coated, and it is nitrogen charged. The nitrogen is designed to limit cavitation during compression and rebound.
A monotube body uses one pressure tube, so the piston and the gas section work inside the same housing. That is different from the inner and outer tubes of a conventional twin-tube shock.
The collapsed length of 13.74 in. is 7.11 in. less than the extended length of 20.85 in. That difference is the travel, so these are the two figures to compare with the shock being replaced.
Key features
- Stem upper mount and loop lower mount
- Monotube body with a nitrogen gas charge
- Multi-stage valving
- Zinc plated, clear coated finish
- Boot included
Measuring before you buy
Before ordering a monotube shock, measure the old unit with the suspension at its normal height. The extended and collapsed lengths are the key figures, and the difference between them is the travel the shock can use. A replacement with a different collapsed length can bottom out early or leave the suspension without enough extension on the trail.
Mount style matters as much as length. A stem upper mount and a loop lower mount need the correct brackets and bushings, and a mismatch can make the shock rub or load unevenly. Check the mounts on the vehicle before removing the old shock, since that makes it easier to confirm the new unit matches.
- Measure the old shock with the suspension at normal height
- Compare the mount style before removing the old unit
- Inspect bushings and brackets for wear
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | ZX2015 |
| UPC | 614901024142 |
| Shock series | Pro Runner |
| Extended length | 20.85 in. |
| Collapsed length | 13.74 in. |
| Travel | 7.11 in. |
| Upper mount | Stem |
| Lower mount | Loop |
| Adjustable | No |
| Remote reservoir | No |
| Gas charged | Yes, nitrogen |
| Finish | Zinc plated, clear coated |
| Boot included | Yes |
Vehicle fitment
It suits the trucks, Jeeps and SUVs covered by the Pro Runner line. Match the year, model and trim of your vehicle before ordering.
Installation notes
Compare the 20.85 in. extended and 13.74 in. collapsed lengths with the shock being replaced, and check that the stem and loop mounts suit your vehicle.
What’s included
One zinc-finished monotube shock, with a boot.


























