Overview
The Pro Comp 317500 is a front ES3000 twin tube cellular gas shock with no lift or drop. It is 15.55 inches extended and 11.05 inches collapsed, with 6.50 inches of travel.
The shock uses loop style mounts at both ends. It is white, not adjustable and sold as each.
Key features
- Front position with 0 inch lift or drop
- Loop upper and lower mounts
- Twin tube cellular gas design
- 10-stage velocity sensitive valving
- Limited lifetime warranty
Long travel and matching lengths
Travel is the distance the piston moves through the body, and it has to suit the suspension it works within. A shock with more stroke than the original can run out of room at full extension or bottom out in different places, so the old shock is the reference point for any replacement.
Loop mounts at both ends rely on bushings to keep the shock aligned with axle movement. Inspect those bushings for splitting and check the bolts for looseness, since a shock that moves sideways in its mount wears faster and steers less predictably.
A chrome plated rod is easier to keep clean than bare steel, but the seal still needs regular attention. Wipe the rod after wet trail runs and look for dirt around the seal, which is where leaks usually start.
- Compare both lengths with the old shock
- Inspect loop bushings each season
- Wipe the rod after wet trail use
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 317500 |
| Series | ES3000 |
| Position | Front |
| Lift or drop | 0 inches |
| Extended length | 15.55 inches |
| Collapsed length | 11.05 inches |
| Travel | 6.50 inches |
| Upper and lower mounts | Loop |
| Adjustable | No |
The 317500 is a front ES3000 shock with loop mounts at both ends and no lift or drop. At 15.55 inches extended and 11.05 inches collapsed, it has 6.50 inches of travel, which is one of the longer strokes among the ES3000 shocks in this set. The shock uses 10-stage velocity sensitive valving, a Teflon rebound stop and a 5/8 inch chrome hardened piston rod.
The limited lifetime warranty applies to the ES3000 shock. Match the loop mounts and the two lengths to the original shock before ordering.
The longer travel of this shock means its extended and collapsed lengths should be checked against the original shock, since the stroke has to match the suspension it is replacing. The loop mounts at each end of the 317500 use a different connection from the stem and loop shocks in the family, so the mounting hardware should be inspected before installation.
Vehicle fitment
No vehicle is named for this shock, and no year range is given. Check the loop mounts and the 15.55 inch extended length against your original shock before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One front ES3000 shock.











