Overview
The Pro Comp ZX2050 is a Pro Runner monotube shock absorber with loop mounts at both ends. It extends to 27.37 inches and offers 9.95 inches of travel. Pro Comp designs the shock for late model trucks, Jeeps and SUVs, and the part is sold as a single shock.
The body is a gas-charged monotube, pressurized with nitrogen rather than a twin-tube hydraulic design. The layout resists cavitation during compression and rebound and sheds heat faster, which helps reduce shock fade on long descents or rough desert trails. The multi-stage valving is tuned for each application, and a boot keeps dirt off the shaft.
A monotube keeps the oil and nitrogen charge in one tube, separated by a floating piston. The nitrogen keeps the oil under pressure, which reduces cavitation during compression and rebound. That is why the ZX2050 is a gas-charged design rather than a twin-tube shock.
Key features
- Gas charged monotube body, nitrogen pressurized
- Multi-stage valving tuned for ride quality and handling
- Heat dissipation designed to reduce shock fade
- Loop upper and lower mounts
- Zinc plated, clear coated finish
- Black boot included
Heat and long descents
Shock fade is a drop in damping when a shock overheats during repeated compression, such as on a long downhill run. Gas-charged monotube designs are intended to reduce this by moving heat away from the working parts. Good airflow over the body and a clean boot help keep the shock within its normal operating range.
Regular checks matter most after hard use. Look at the body for oil, the boot for splits and the mounts for play. A shock that feels soft or fades after a few runs should be inspected, since a worn internal seal or damaged valving will change how the unit responds.
- Keep the body clear of mud and debris
- Check the boot after each trip
- Look for oil on the outside of the body
- Inspect mounts for play
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | ZX2050 |
| UPC | 614901024531 |
| Shock series | Pro Runner |
| Extended length | 27.37 in |
| Collapsed length | 17.42 in |
| Travel length | 9.95 in |
| Upper mount | Loop |
| Lower mount | Loop |
| Body | Monotube, gas charged |
| Adjustable | No |
| Remote reservoir | No |
| Finish | Zinc plated, clear coated |
| Boot | Included |
| Sold as | Each |
Vehicle fitment
Designed for late model trucks, Jeeps and SUVs. Confirm the year, model and trim against your vehicle, then check the collapsed and extended lengths against the shock being replaced before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Both ends use loop mounts, so confirm your vehicle’s shock mounting points use the same style before installation. Because the length and travel are fixed, the shock should be checked against the ride height and suspension travel of the vehicle it is going on.
What’s included
One gas charged Pro Runner monotube shock with a boot, sold as each.



























