Overview
The Pro Comp 315512 is an ES3000 twin tube cellular gas shock built with 10-stage velocity sensitive valving. It measures 15.69 inches extended and 10.02 inches collapsed, with 5.67 inches of travel.
The shock has a stem upper mount and a loop lower mount. It is finished in white, is not adjustable and is sold as each.
Key features
- Twin tube cellular gas design
- 10-stage velocity sensitive valving
- 5/8-inch chrome hardened piston rod
- Double welded shock mounts
- Limited lifetime warranty
Checking shock length before buying
Shock length decides whether a replacement can be installed without strain. Extended length sets how far the shock reaches when the suspension is unloaded, and collapsed length sets how far it can compress before the stops engage. Travel is the difference between the two and controls how much the suspension can articulate on rough ground. Measure the old shock stud to stud or eye to eye, then compare those figures with the new unit before buying.
Mount style matters as much as length. A stem mount clamps into a rubber bushing, while a loop mount uses a bolt through an eye, and the two are not swapped without changing hardware. Inspect the bushings while the old shock is off, since cracked or flattened rubber causes noise and lets the shock move in its mounts. A new shock installed on worn bushings carries uneven load from its first mile.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 315512 |
| Series | ES3000 |
| Extended length | 15.69 inches |
| Collapsed length | 10.02 inches |
| Travel | 5.67 inches |
| Upper mount | Stem |
| Lower mount | Loop |
| Adjustable | No |
The 315512 is an ES3000 twin tube cellular gas shock with a stem upper mount and a loop lower mount. At 15.69 inches extended and 10.02 inches collapsed, it has 5.67 inches of travel. Pro Comp uses 10-stage velocity sensitive valving and a Teflon rebound stop in this shock, and the 5/8 inch chrome hardened piston rod and double welded mounts are the main structural parts.
Because no vehicle is named and the shock is not adjustable, the stem and loop mounts and the two lengths are the points to check before ordering.
Vehicle fitment
No application is named for this shock. Confirm the length and the stem and loop mounts against your original shock before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One ES3000 shock.








