Overview
The Rubicon Express RXT Monotube Shock Absorber, part number RXT2621B, has an extended length of 26.5 inches, a collapsed length of 15.5 inches and an 11-inch stroke. It uses stem and eyelet mounts. Confirm the design type, monotube or twin-tube, before ordering.
The RXT shock has a slim black body and is a running replacement for the prior version of this twin-tube line. A black urethane shock boot and mounting hardware are included.
Key features
- 11-inch stroke
- Stem and eyelet mounts
- Slim black body
- Black urethane shock boot included
- Gas charged, per the specifications
Measuring before you order
Length and stroke decide whether a shock will fit between its mounts and how far it can travel. Measure the old shock eye-to-eye when fully extended and again when fully collapsed, then compare both numbers with the new part before buying.
Stem and eyelet mounts are not interchangeable with eyelet-to-eyelet mounts. Stem ends usually thread into a bracket, while eyelets use a bolt through a bushing. Matching the end style is as important as matching the length.
Set the shock to the correct ride height when installing it, and avoid tightening the bolts while the suspension is hanging. A shock installed under load in the wrong position can bind and wear out early.
- Measure eye-to-eye at full extension and full compression
- Match end style as well as length
- Tighten bolts with the suspension at ride height
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RXT2621B |
| UPC | 614901453867 |
| Shock series | RXT Monotube |
| Extended length | 26.5 inches |
| Collapsed length | 15.5 inches |
| Stroke | 11.0 inches |
| Mounts | Stem and eyelet |
| Charge | Gas |
| Included | Black urethane shock boot, mounting hardware |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim, and check the mount type, before ordering.
Installation notes
The shock uses stem and eyelet mounts, so confirm your existing mounts match before installing.



