Overview
The Pro Comp Pro Runner Monotube Shock Absorber, part number ZX2023, is a rear gas-charged monotube shock for 2004-2014 Ford F-150 trucks. It has a 28.86-inch extended length, an 18.11-inch collapsed length and 10.76 inches of travel, and it comes with a boot.
The Pro Runner is designed for late-model trucks, Jeeps and SUVs. Its monotube body is nitrogen gas charged, which helps prevent cavitation during compression and rebound and helps the shock shed heat. The multi-stage valving was tuned through dyno and real-world testing, and the design is built to resist shock fade.
The body is zinc plated and clear coated, and the shock is not adjustable and has no remote reservoir. Pro Comp rates the rear lift range for 0 to 1.5 inches, so it suits a truck with a small lift rather than a large lift.
Key features
- Gas-charged monotube design
- Nitrogen gas charge to reduce cavitation during compression and rebound
- Multi-stage valving for ride quality and handling
- Zinc plated, clear coated body
- Boot included
Choosing a rear shock
A rear shock controls how the axle moves over bumps and under braking, so it has a direct effect on ride comfort and how quickly the truck settles after a dip. Monotube designs keep the oil and gas in one tube, which many owners pick for steadier damping during longer drives and repeated use off road.
When choosing a rear shock, match the extended and collapsed lengths to your current shock and check that the mounts line up with the truck’s upper and lower points. Compare the rated travel with how far the axle moves on your typical trails, and think about the bump stops, springs and any spacer or lift already on the truck. Worn bushings and leaking shocks are common reasons to replace the pair together.
Shocks are often replaced in pairs so both rears damp the same way. Keep the boot in good shape, since dirt on the rod can damage the seal. Look for oil on the body, a knocking sound over bumps, or uneven tire wear as signs that the shock is finished.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | ZX2023 |
| UPC | 614901024258 |
| Shock series | Pro Runner |
| Position | Rear |
| Extended length | 28.86 inches |
| Collapsed length | 18.11 inches |
| Travel length | 10.76 inches |
| Upper mount | Loop |
| Lower mount | Loop |
| Adjustable | No |
| Remote reservoir | No |
| Finish | Zinc |
| Gas charged | Yes |
| Lift height range | 0 to 1.5 inches |
| Boot included | Yes |
Vehicle fitment
The ZX2023 is a direct fit for the 2004-2014 Ford F-150 in the rear position. Compare your current rear shock’s 28.86-inch extended length and 18.11-inch collapsed length against these figures before ordering.
Other Ford trucks and SUVs, including the Super Duty models, are not on this list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One rear gas-charged monotube shock with a boot, sold as each.





























