Overview
The Pro Comp Pro Runner monotube shock, part number ZX2019, is a rear gas charged shock with a 26.71-inch extended length. It fits the 2004–2008 Ford F-150 and is sold as one unit with a boot.
The shock body is brushed, zinc plated and clear coated, and it is nitrogen gas charged. The gas charge limits cavitation during compression and rebound and helps the shock release heat and resist fade. Multi-stage valving is tuned on a dyno and in real-world driving, and the monotube layout separates the gas from the oil in place of a traditional twin tube hydraulic design.
Key features
- Gas charged monotube design with a nitrogen charge
- Multi-stage valving
- Brushed, zinc plated and clear coated body
- Boot included
- Upper and lower loop mounts at both ends
- Zinc finish
- Rated for 0 to 1.5 inches of lift
Before you buy
A rear monotube shock affects how the back of a truck settles under load and how it recovers after a bump. Before buying, look at how the shock is mounted, since loop-to-loop designs must match the existing mounting points on the axle and frame. Compare the collapsed and extended lengths with the old shock so the new unit sits within the same working range.
Shocks are often replaced in pairs on the same axle, because mismatched damping can change how the rear end tracks and brakes. Inspect bushings and mounting hardware at the same time, since a worn bushing can make a new shock feel loose. Keep the boot in place, because it keeps grit off the shaft and helps the seal last.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | ZX2019 |
| UPC | 614901024210 |
| Shock series | Pro Runner |
| Position | Rear |
| Extended length | 26.71 in |
| Collapsed length | 16.74 in |
| Travel length | 9.97 in |
| Upper and lower mounts | Loop |
| Adjustable | No |
| Remote reservoir | No |
| Finish | Zinc |
| Boot | Included |
| Lift height | 0 to 1.5 in |
| Sold as | Each |
Vehicle fitment
The shock fits the 2004–2008 Ford F-150.
Other F-150 model years and other Ford models are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Both ends use loop mounts, so the shock needs loop-style mounting points at the axle and the frame. Compare the 26.71-inch extended length and 16.74-inch collapsed length with the space available before fitting the shock. The lift range is 0 to 1.5 inches, so confirm your lift height falls within it before installing.
What’s included
One Pro Runner monotube shock with its boot.





























