Overview
The Fabtech rear adjustable track bar, part number FABFTS24167, is a rear track bar for the Jeep Wrangler JK with a 1.75 to 5 inch adjustment range. A rear track bar keeps the rear axle centered side to side under the body, and an adjustable bar lets you set that position on the vehicle, which matters once a lift changes the suspension geometry.
Fabtech has more than 20 years of experience in aftermarket suspension design. The parts are developed with in-house engineering, software and fabrication.
Adjustable rear track bars are commonly used on lifted Wranglers to bring the axle back to center after the stock bar no longer matches the new height. Setting the length correctly is what keeps the axle centered, so the adjustment should be checked once the bar is installed.
Key features
- Adjustable rear track bar with a 1.75 to 5 inch range
- Direct fit for 2007 to 2018 Jeep Wrangler JK models
- Adjustable length to set rear axle centering after a lift
- Designed in-house by Fabtech
- Part number FABFTS24167
Alignment after adjusting
A rear track bar keeps the axle from drifting side to side, and the adjustable version is the tool for setting that position after a lift. Once the length is set, the axle sits where the geometry needs it. Getting the length right at the start saves retesting the steering and tire wear later.
Lifted Wranglers put extra demands on the rear end. Changing the height alters the angle of the links and the bar, so the axle may need to move back toward center. Check how the bar sits at both ends and confirm the bushings are seated before you drive the vehicle any distance.
Maintenance is simple but worth doing. Recheck the bar’s clamp or hardware torque after the first few trail runs, and inspect the bushings for cracks or grease loss. A bar with worn bushings lets the axle wander, and the handling changes quickly once that happens.
- Check the bar at both ends for play
- Inspect bushings for cracking or wear
- Retighten hardware after the first trail runs
- Schedule an alignment after adjusting the length
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FABFTS24167 |
| Position | Rear |
| Type | Adjustable track bar |
| Range in title | 1.75 to 5 in. |
| Fit | Direct fit |
Vehicle fitment
It is a direct fit for 2007 to 2018 Jeep Wrangler (JK) models, in both two-door and four-door bodies. The trims include Rubicon, Sahara, Sport, Sport S, X and the 70th and 75th Anniversary editions.
Wrangler TJ, JL and LJ models are not in this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
An adjustable track bar changes axle position, so have the rear alignment checked after the bar is set to length.
What’s included
The rear adjustable track bar. Check the package contents against your installation before starting.








