Overview
The Pro Comp JTB400 is a heavy duty adjustable front track bar for lifted vehicles. It keeps the axle centered under the front end and reduces bump steer on lifted trucks and SUVs. The bar has a heim joint with a jam nut and poly bushings with a steel sleeve, with a powdercoated finish. A hardware kit is included. It mounts in the front location and carries part code EXPJTB400.
Track bar length and mounting points vary by vehicle, so confirm fit for your year, model and trim before ordering.
Key features
- Heavy duty construction
- Adjustable length for axle centering
- Heim joint with jam nut
- Poly bushings with steel sleeve
- Powdercoated finish
- Hardware kit included
Bump steer and track bar geometry
A track bar locates the axle side to side, and its length and mounting angle decide how much the axle shifts as the suspension moves. On a lifted truck the bar often sits at a steeper angle than it did stock, which is where bump steer tends to come from. Adjusting the length brings the axle back to center, but set the bar with the suspension at its normal ride height so the arc stays balanced.
Heim joints and poly bushings wear differently. A heim joint can develop play at the rod end, and poly bushings can squeak or loosen the mount over time. Check the joint for free movement and the jam nut for tightness on a regular schedule, and re-check the adjustment after any suspension change.
- Check the heim joint for play
- Look for cracks at the frame mount
- Re-center the axle after any lift change
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | JTB400 |
| Listed part code | EXPJTB400 |
| UPC | 614901180916 |
| Location | Front |
| Joint | Heim joint with jam nut |
| Bushings | Poly with steel sleeve |
| Finish | Powdercoated |
| Fitment type | Direct fit (vehicles not named) |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering.
Track bar length and mounting points differ between vehicles, so the vehicle match matters. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Set the adjustable length so the axle is centered in the body at the lift height you run, then check the bump steer. A heim joint needs its jam nut tightened once the length is set, so check it after the first drive.
What’s included
The package includes the adjustable front track bar, the heim joint with jam nut, the poly bushings with steel sleeve and a hardware kit.









