Overview
The Pro Comp 43 Series Sledge 20×9 wheel, part number PXA5143-2936, is a 20-inch aluminum spoke wheel with a 9-inch width. It uses a six-lug 6 on 135 bolt pattern and a satin black finish with milled accents, named in the series as 43 Series Sledge satin black and milled.
The wheel has an 83 center bore, a 0 offset and a backspacing of 5. It is built with low-pressure casting and carries a load rating of 2500 to 3650 lbs per wheel. It is universal fit and is not assigned to a vehicle.
Key features
- Low-pressure cast aluminum
- 20 inches in diameter and 9 inches wide
- 6 on 135 bolt pattern
- Center bore 83
- Offset 0 with backspacing 5
- Satin black with milled accents
Centered face and caliper room
A zero offset places the mounting face on the centerline of the wheel, which spreads load evenly across the hub and bearing. The face position matters for brake caliper room, so measure caliper clearance with the wheel on the hub before final tightening.
Six-lug 135 patterns are used on heavier vehicles, and the 83 center bore needs to seat on the hub properly. If the bore is larger than the hub, hub-centric rings help keep the wheel true. Check the lug nut seat type against the wheel holes before torquing.
A 20-inch wheel changes the tire, so compare the rolling diameter and sidewall height with the original tire. Tire pressure and load limits should follow the tire’s own markings. Inspect spokes and milled areas after the first few drives for cracks, loose bolts or rubbing marks.
- Check caliper clearance with the wheel mounted
- Match the lug nut seat type to the wheel holes
- Compare rolling diameter with the original tire
- Inspect spokes and milled areas after early drives
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | PXA5143-2936 |
| Wheel diameter | 20 inches |
| Wheel width | 9 inches |
| Bolt pattern | 6 on 135 |
| Center bore | 83 |
| Offset | 0 |
| Backspacing | 5 |
| Load rating | 2500 to 3650 lbs per wheel. |
| Style | Spoke |
| Finish | Satin black, milled |
| Construction | Aluminum |
| Series | 43 Series Sledge |
Vehicle fitment
No vehicle is named for this wheel. Confirm the 6 on 135 hub and 83 center bore first, since these two figures decide whether the wheel mounts, and then check the 20-inch size against the caliper.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The center bore must seat on the hub correctly, so measure it before mounting. A 0 offset places the wheel face at the center, which should be checked against brake clearance.
The 83 center bore must seat on a six-lug 135 hub. The 0 offset keeps the wheel face centered, and the 5 backspacing sets its inner position, so both figures should be checked against the caliper.
What’s included
One 20×9 satin black wheel with milled accents is included. Check the package contents against your installation before starting.











