Overview
The Pro Comp PXA7031-2936 is a 20×9 split-spoke aluminum wheel in the 31 Series Stryker line, finished in matte black. It uses a 6 on 135 bolt pattern with a center bore of 87, a 0 offset and a backspacing of 5.
The matte black finish is the alternative to the chrome PXA6631-2936, which shares the same size, bolt pattern and bore. Pro Comp describes its alloy wheels as cast with low-pressure casting technology.
The 6 on 135 pattern and 87 center bore must match the hub. The 0 offset and 5 backspacing place the 9-inch wide face near the centerline, and a 20-inch rim requires a tire sized for it.
The face is matte black with a split-spoke design, and the wheel is built from aluminum.
Confirm the tire size and load rating before mounting this 20-inch wheel.
Key features
- Matte black finish
- Split-spoke aluminum face
- 6 on 135 bolt pattern
- Center bore 87
- Offset 0 and backspacing 5
Keeping a matte finish clean
Matte finishes have a flat surface that holds dirt differently than glossy paint, so grime can look more visible on them. Clean with a pH-neutral wheel cleaner and a soft brush, and rinse thoroughly so no residue is left in the texture. A soft sponge is gentler than a stiff brush, which can leave permanent marks on the surface.
Waxes and polishes are not suited to matte surfaces, since they can leave a shine patch or a smudge that is hard to remove. Brake dust is best cleared soon after driving, before it bakes onto the spokes and edges.
Check the split-spoke joints and the face for scratches or bends after trail use, because a scuffed area is easier to spot on a flat finish and can hold more debris.
- Use pH-neutral cleaner
- Skip waxes on the face
- Look for scuffs after trails
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | PXA7031-2936 |
| Diameter | 20 inches |
| Width | 9 inches |
| Bolt pattern | 6 on 135 |
| Center bore | 87 |
| Offset | 0 |
| Backspacing | 5 |
| Style | Split spoke |
| Finish | Matte black |
| Construction | Aluminum |
| Series | 31 Series Stryker |
Vehicle fitment
The fit label on this wheel is universal. A 6 on 135 hub with an 87 bore is the match to check, along with the 0 offset and the tire size for a 20-inch rim.
Select tires that suit a 20-inch rim that is 9 inches wide. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One matte black wheel. Compare the packing contents with your installation steps.











