Overview
The Pro Comp PXA5174-7973 is a 17×9 aluminum spoke wheel from the Pro Comp 74 Series Trilogy Pro line, in satin black milled with a 5 on 5 bolt pattern. It is sold as one wheel with a center bore of 72 and an offset of -6.
This 9-inch-wide wheel has a backspacing of 4.75, and the brand describes its high offset construction as designed for brake clearance on trucks and sport utility vehicles.
Key features
- Low-pressure cast aluminum construction
- Spoke face style
- 17-inch diameter, 9-inch width
- 5 on 5 bolt pattern
- Center bore of 72
- Offset -6 with 4.75 backspacing
Matching the wheel to your use
A wheel for daily driving and one for rock trails share the same bolt pattern checks, but they face different loads. Road use mostly brings curb strikes, potholes and salt. Trail use adds side loads from rocks and ledges, which concentrate stress near the spoke bases. Think about which of these your vehicle sees most often.
Tire choice goes along with the wheel. A tire with a stiffer sidewall adds some protection to the rim edge, while a softer tire conforms to rocks but exposes more of the bead. Balance the tire to the rim after mounting, and check for bead leaks after the first drive.
- Road use: watch for curb strikes
- Trail use: inspect spoke bases after ledges
- Balance tire and wheel after mounting
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | PXA5174-7973 |
| Series | 74 Series Trilogy Pro |
| Style | Spoke |
| Construction | Aluminum |
| Finish | Satin black milled |
| Diameter | 17 inches |
| Width | 9 inches |
| Bolt pattern | 5 on 5 |
| Center bore | 72 |
| Offset | -6 |
| Backspacing | 4.75 |
Vehicle fitment
No vehicle is named for this wheel. Universal fit on the specifications does not identify a truck or Jeep. A 5 on 5 hub with a 72 center bore is the match to check, then the -6 offset against the fender and brake caliper.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Use a five-lug hub in a 5 on 5 layout and confirm the 72 center bore before ordering. Test-fit the 9-inch rim with the tire to make sure it clears the brake parts at full steering lock. The 5 on 5 spacing must match the hub exactly, and the 72 center bore should seat on the hub pilot. The 9-inch width and -6 offset set how the tire sits relative to the fender, so choose a tire width suited to a 9-inch rim. The 4.75 backspacing places the inner lip behind the mounting face, which affects caliper and suspension room. Test-fit the wheel with the chosen tire and check clearance at full steering lock. Measure the hub bolt holes before ordering. The satin black milled finish does not change the fit checks. Recheck after any change in tire diameter, wheel spacers or suspension height before the vehicle goes off road.
What’s included
One 17×9 aluminum wheel. Compare any hardware you receive against your installation plan before starting.











