Overview
The Pro Comp PXA5160-895550 is an 18×9 aluminum wheel from the Pro Comp 60 Series Hammer line, with a windowed face, a satin black milled finish and a 5 on 150 bolt pattern. It is sold as one wheel.
The Hammer is cast with low-pressure casting, a process that supports strength with a light weight. This 9-inch-wide wheel has a center bore of 110, an offset of 0 and a backspacing of 5. Alloys in this line are rated from 2500 to 3650 lbs per wheel, and the Pro Comp Promise provides a transferable warranty.
Key features
- Low-pressure cast aluminum construction
- 18-inch diameter, 9-inch width
- 5 on 150 bolt pattern
- Center bore of 110
- Zero offset with 5 backspacing
- Satin black milled finish on a windowed face
Hub pattern and centering
Bolt pattern and center bore do different jobs. The bolt pattern is the lug count and the diameter of the circle the lug holes sit on, and it decides whether the wheel can be bolted on at all. The center bore centers the wheel on the hub. Both need to match before any other fitment question matters, because a wrong pattern cannot be corrected with hardware.
A zero offset moves the mounting face to the wheel’s centerline, which changes how the tire sits relative to the suspension and brake parts. Clearance should be checked with the tire mounted, including at full steering lock. Light edge rash on the windowed face is common on trail wheels, so inspect the window edges after rocky runs and touch up any exposed metal.
- Measure the bolt circle across the lug holes
- Compare the center bore with the hub pilot
- Use a torque wrench on the lug nuts
- Inspect the window edges for stone damage
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | PXA5160-895550 |
| Series | 60 Series Hammer |
| Style | Windowed |
| Construction | Aluminum |
| Finish | Satin black milled |
| Diameter | 18 inches |
| Width | 9 inches |
| Bolt pattern | 5 on 150 |
| Center bore | 110 |
| Offset | 0 |
| Backspacing | 5 |
| Load rating | 2500 to 3650 lbs per wheel (Pro Comp alloy range) |
Vehicle fitment
No vehicle is named for this wheel. It is built for a 5 on 150 hub, a specific layout, so the hub pattern and 110 center bore must match the vehicle exactly before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm the 5 on 150 pattern and the 110 center bore before ordering, since the wheel will not seat on a different hub. A zero offset places the mounting face at the wheel’s centerline, so check the tire and caliper clearance with a test fit.
What’s included
One 18×9 aluminum wheel. The set does not include lug nuts or a center cap.











