Overview
The Pro Comp PXA7069-7973 is a 17×9 flat black aluminum wheel from the Pro Comp 69 Series Vintage line, with a Holes style and a 5 on 5 bolt pattern. It is sold as one wheel with a center bore of 83, an offset of -6 and a backspacing of 4.75.
The alloy is low-pressure cast, which keeps the wheel light while giving the flat black finish a durable surface. The high offset design moves the mounting face inward to help clear brake calipers on trucks and sport utility vehicles.
Key features
- Low-pressure cast aluminum construction
- Holes style face
- 17-inch diameter, 9-inch width
- 5 on 5 bolt pattern with a center bore of 83
- Offset -6 with 4.75 backspacing
- Flat black finish
Choosing hub and offset
Hub match comes first. Wheels with a 5 on 5 pattern and a centered 83 bore seat on hubs machined for that layout, so compare the bolt count, spacing and pilot before the tire goes on. A rim with a negative offset sits farther outboard, which changes how the tire clears the strut, control arms and brake caliper. Anyone upgrading from a stock wheel should expect the tire to move and should check the steering stops and wheel well during a slow test turn.
Tire choice matters as well. A 9-inch rim suits a range of tire widths, but the sidewall height and load rating should match the vehicle’s original setup. Wider tires can rub at full lock, so re-check clearance after any change to tire size or suspension height. Lift kits and bigger tires often lead to a wheel and tire swap at the same time.
- Check bolt count and spacing against the hub
- Test-fit with the tire mounted
- Re-check clearance after suspension changes
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | PXA7069-7973 |
| Series | 69 Series Vintage (Classic) |
| Style | Holes |
| Construction | Aluminum |
| Finish | Flat black |
| Diameter | 17 inches |
| Width | 9 inches |
| Bolt pattern | 5 on 5 |
| Center bore | 83 |
| Offset | -6 |
| Backspacing | 4.75 |
Vehicle fitment
No vehicle is named for this wheel. Universal fit on the specifications does not tie the wheel to a model. A 5 on 5 hub with an 83 center bore is required, and the -6 offset should be checked against the fender and caliper.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Use a five-lug hub in a 5 on 5 layout and confirm the center bore before ordering. The 9-inch width needs a matching tire, and a test fit with the tire mounted confirms clearance at the caliper.
What’s included
One 17×9 aluminum wheel. Check the package contents against your installation before starting.











